Coleman LAKESIDE 9163-150 Instructions

When You Are Ready To Set
Up Your Tent
–Select a level campsite clear of
rocks, branches and other hard or
sharp objects.
–Do not set up your tent under trees.
–For best results in windy conditions,
position the end of tent into the wind.
–See owners manual for more tips.
1 Layout & Positioning
of Tent, Pole Assembly
–Layout and position tent with door
facing desired direction. (illus. 1)
–Unzip doors.
–Stake down tent corners only, using the
stake loops. Keep the floor taut.
(Intermediate loops will be staked later.)
–Assemble frame poles by interlocking
shock-corded poles. (three poles)
–Insert the grey pole straight through the
center pole sleeves in the middle of tent.
Then insert black poles straight through
outside pole sleeves. (illus. 1)
illus. 1
Assembled
Black main
poles
inserted
through
pole sleeves
Lakeside
Instructions apply to Part Number 9163-150
Part No. 9163-503
Part No. 9163-505
Rainfly Poles
Part No. 9163-504
Grey main pole
through center
sleeves
illus. 2
Tent stake
through
stake loop
Main Tent Poles (Black)
Main Poles
Main Pole Main Tent Poles (Grey)
Part No. 9163-502
2 Connect Frame to Tent
–Start with the center Grey main pole.
Insert the pin into the end of the grey
main tent pole at tent's edge. (illus. 3 & 4)
–Go to opposite end of pole and
gradually apply pressure to the pole
forming an arch until you are able to
insert the pin into the opposite pole end.
–Repeat for two black main poles.
™
15'x10'
Rainfly
Grey Pole
Black Pole
illus.3
Insert pin
into pole end
Black Pole
illus. 4
Tent frame set-up