EMC CLARiiON 300002039 Installation Manual

This guide describes how to install and remove the Navisphere® Host
Agent, Navisphere Storage System Initialization Utility, Navisphere Server
Utility, Navisphere Command Line Interface (CLI), and admsnap software
on a Sun Solaris operating system.
For information on supported operating system revisions and server
software with a CX3-series or CX-series storage system, refer to the E-Lab™
Interoperability Navigator on the
storage systems, refer to the Support Matrix (Supported Configurations) or
the Supported Configurations link on the Install web page for your storage
system.
Note: This document uses the term CX3-series to refer to CX3 model 10 systems,
CX3 model 20 systems, CX3 model 40 systems, and CX3 model 80 systems, and
the term CX-series to refer to CX200, CX300-series, CX400, CX500-series, CX600,
and CX700 storage systems, and the term AX-series to refer to AX150-series and
AX100-series storage systems.
Topics include:
About EMC Navisphere Software ................................................... 3
Finding current information ........................................................... 8
Installing and removing the Navisphere Storage System Initialization
Utility .......................................................................................... 9
Running the Navisphere Storage System Initialization Utility ........... 12
Determining whether to install the host agent or server utility........... 17
Requirements for the host agent, server utility, and CLI ................... 20
Installing or removing the Navisphere Host Agent and CLI ............. 22
Configuring the Navisphere Host Agent ......................................... 28
Using the Event Monitor configuration file...................................... 30
Running the Navisphere Host Agent .............................................. 31
EMC CLARiiON Server Support
Products for Solaris Server
P/N 300-002-039, Revision A10
Powerlink

Installation Guide

August 17, 2007
website. For AX-series
1