See Product Reference Guide for detailed information
USB
Important: Out of box, Keyboard Wedge and USB interfaces require no bar code scan setup. Bar codes are provided for complex programming or interface changes.
Scan
of the bar codes below
ONE
IBM HAND-HELD USB
HID KEYBOARD EMULATION
To add an ENTER key after scanned data, scan all
1
SCAN OPTIONS
To add a Tab key after scanned data, scan all
1
SCAN SUFFIX
Attach Cable
STEP 2 -CONNECT CABLE TO A HOST
NOTE: Cables may vary depending on configuration.
Keyboard Wedge
STEP 3 - SET UP INTERFACE (Scan Host Bar Codes)
Keyboard Wedge
Scan
of the bar codes below
ONE
IBM AT Notebook
IBM PC/AT and IBM PC COMPATIBLE
ADD AN ENTER KEY (CARRIAGE RETURN/LINE FEED)
THREE
bar codes below in numerical order.
2
<DATA><SUFFIX>
ADD A TAB KEY
THREE
Enter key bar codes above in numerical order then scan all
Summary of Contents for Motorola LS2208-7AZU0100ZR - Symbol LS2208 - Wired Handheld Barcode Scanner
Page 1
SYMBOL LS2208 Quick Start Guide STEP 1 - ATTACH CABLE TO SCANNER http://www.motorola.com/ls2208 Attach Cable Remove Cable (to change interface) See Product Reference Guide for detailed information STEP 2 -CONNECT CABLE TO A HOST NOTE: Cables may vary depending on configuration.
Page 2
Symbol Technologies, Inc., the Enterprise Mobility business of Motorola, Inc. ("Motorola"). Motorola does not assume any product liability arising out of, or in connection with, the application or use of any All Symbol devices are designed to be compliant with rules and regulations in locations they are sold product, circuit, or application described herein.
Need help?
Do you have a question about the LS2208-7AZU0100ZR - Symbol LS2208 - Wired Handheld Barcode Scanner and is the answer not in the manual?
Questions and answers