The Bluetooth connection problem with the Onkyo TX-NR727 receiver, as described in the context, is that while some mobile phones, like the LG G2, can pair and stream audio without issues, other phones, such as the HTC One, cannot detect the receiver via Bluetooth. Despite attempts to pair the HTC One with the receiver, it fails to establish a connection.

This answer is automatically generated

Summary of Contents for Onkyo TX-NR727

Page 1: Table Of Contents
Contents Safety Information and Introduction ....2 AV RECEIVER TX-NR727 Table of Contents ...........6 Connections ..........12 Turning On & Basic Operations....21 Instruction Manual Playback............29 Advanced Operations ........52 Controlling Other Components....76 Appendix ............82 Internet Radio Guide Remote Control Codes...
Page 2: Safety Information And Introduction
Safety Information and Introduction 9. Do not defeat the safety purpose of the polarized B. If liquid has been spilled, or objects have fallen or grounding-type plug. A polarized plug has two into the apparatus, WARNING: blades with one wider than the other. A grounding C.
Page 3: Precautions
If water or any other liquid gets –Increase the separation between the equipment cloths, thinners, alcohol, or other chemical inside this unit, have it checked by your Onkyo and receiver. solvents, because they may damage the finish or dealer.
Page 4 –Hereby, Onkyo Corporation, declares that this dispositif rayonnant et le corps (à l’exception des proceed as follows: TX-NR727 is in compliance with the essential extrémités : mains, poignets, pieds et chevilles). requirements and other relevant provisions of The wire which is coloured blue must be connected to For Canadian Models Directive 1999/5/EC.
Page 5: Supplied Accessories
Smernice 1999/5/ES. enable you to obtain optimum performance and esenciales y otras exigencias relevantes de la –Onkyo Corporation izjavlja, da je ta TX-NR727 v listening enjoyment from your new AV Receiver. Directiva 1999/5/EC. skladu z bistvenimi zahtevami in drugimi Please retain this manual for future reference.
Page 6: Table Of Contents
Connection Tips ............17 Remapping Colored Buttons ........77 Displaying Source Information........49 Connecting the Antennas..........19 Remote Control Codes for Onkyo Components Using the Sleep Timer ..........49 Connecting Onkyo RI Components......20 Connected via RI ........... 77 Setting the Display Brightness........49 Using Headphones............20...
Page 7: Features
• 110 Watts/Channel @ 8 ohms (FTC) * Compatible with HDMI IN 1 to HDMI IN 4 only • 170 Watts/Channel @ 6 ohms (IEC) • Onkyo for System Control • 185 Watts/Channel @ 6 ohms (JEITA) • 3 Digital Inputs (1 Optical/2 Coaxial) •...
Page 8: Front & Rear Panels
Safety Information and Introduction Front & Rear Panels Front Panel (North American and Taiwanese models) (European, Australian and Asian models) For detailed information, see the pages in MEMORY button (38) Input selector buttons (29) parentheses. TUNING MODE button (38) DISPLAY button (49) ON/STANDBY button (21) HOME button (51) USB port (32)
Page 9: Display
Safety Information and Introduction Display For detailed information, see the pages in Tuning indicators SLEEP indicator (49) parentheses. RDS indicator (excluding North American and Channel/Unit indicators Z2 (Zone 2) indicator (75) Taiwanese models) (39) ch indicator AUTO indicator (38) Z3 (Zone 3) indicator (75) Hz indicator TUNED indicator (38) 3D indicator...
Page 10: Rear Panel
Safety Information and Introduction Rear Panel (North American, Australian and Asian models) (European and Taiwanese models) See “Connecting Your Speakers” for connection Power cord (North American, Australian and (➔ pages 12 to 20). Asian models) REMOTE CONTROL jack DIGITAL IN COAXIAL and OPTICAL jacks COMPONENT VIDEO IN and OUT jacks GND screw ETHERNET port...
Page 11: Remote Controller
Installing the batteries RETURN button HOME button (51) SLEEP button (49) • You can also use the remote controller to control Onkyo Blu-ray Disc/DVD player, CD player, and other components. Batteries (AA/R6) See “Entering Remote Control Codes” for more details (➔...
Page 12: Connections
Connections Speaker Configuration To find the best position for your subwoofer, while playing a movie or some music with good bass, The following table indicates the channels you should experiment by placing your subwoofer at various use depending on the number of speakers that you positions within the room, and choose the one that have.
Page 13: Connecting The Speaker Cables/Powered Subwoofers
Connections Connecting the Speaker Cables/Powered Subwoofers Before connecting the power cord, connect all of your speakers and AV components. A setup wizard Please connect for 5.1-channel surround. is launched upon first-time use to let you perform If you’re using only one surround back the settings.
Page 14 Connections ■ Speaker Connection Precautions Bi-amping the Front Speakers Using Dipole Speakers • You can connect speakers with an impedance of between 4 and 16 ohms. If the impedance of any of Important: the connected speakers is 4 ohms or more, but less •...
Page 15: Connecting The Tv/Av Components
Connections Use this jack to connect to the set top box/digital Connecting the TV/AV components video recorder, etc. Use this jack to connect to the game consoles, Before connecting the power cord, connect all of your speakers and AV components. To display the setup etc.
Page 16: About Rihd-Compatible Components
“Performing Wireless LAN Setup” for connections ■ Players/Recorders (➔ page 27). • Onkyo and Integra -compatible players • Toshiba players and recorders • Sharp players and recorders (only when used together with Sharp TV) The default of the assignment for the input selector buttons and jacks are as shown below. These settings can be changed.
Page 17: Operations That Can Be Performed With Rihd Connection
Connections • On the TV, when you select anything other than the HDMI Operations that can be performed with Confirm the settings jack to which the AV receiver is connected, the input on the RIHD connection AV receiver will be switched to “TV/CD”. 1.
Page 18 Connections This is possible when “Audio Return Channel” is set to Signal Selection Example Video Signal Flow Chart “Auto” (➔ page 71), the TV/CD input selector is Blu-ray Disc/DVD player, etc. Blu-ray Disc/DVD player, etc. selected, and your TV is ARC capable. Composite Component HDMI...
Page 19: Connecting The Antennas
Connections ■ Coaxial digital audio Connecting the Antennas Coaxial digital connections allow you to enjoy digital sound such as PCM , Dolby Digital or DTS. The This section explains how to connect the supplied indoor FM antenna and AM loop antenna. audio quality is the same as optical.
Page 20: Connecting Onkyo Ri Components
• Some components may not support all functions. Refer (➔ page 77). to the manuals supplied with your Onkyo components. • While Zone 2/3 is on, the System On/Auto Power On and Direct Change functions do not work. En-20...
Page 21: Turning On & Basic Operations
Turning On & Basic Operations the same circuit. If this is a problem, plug the AV receiver Turning Off into a different branch circuit. • Do not use a power cord other than the one supplied with Press ON/STANDBY on the front panel. the AV receiver.
Page 22: Firmware Update Notification
Turning On & Basic Operations Initial Setup Firmware Update Notification Use / on the AV receiver or remote controller to select one of the following When a new version of the firmware is available, the This section explains the settings that we recommend options, and then press ENTER.
Page 23: Source Connection
Turning On & Basic Operations Follow the instructions on screen to perform Source Connection Remote Mode Setup the network checking. This step checks the connection of source With this step, you can enter remote control codes for The checking is complete when the message components.
Page 24: Using The Automatic Speaker Setup
Turning On & Basic Operations Measurement procedure Using the Automatic Speaker Setup Note • Make the room as quiet as possible. Background noise and To create a listening environment in your home With the supplied calibrated microphone, Radio Frequency Interference (RFI) can disrupt the room theater that all listeners will enjoy, Audyssey MultEQ Audyssey MultEQ ®...
Page 25 Turning On & Basic Operations Turn on the AV receiver and the connected TV. Adjust the subwoofer volume level to 75 dB, Use / to select an option, and then press and then press ENTER. On the TV, select the input to which the AV ENTER.
Page 26 If this message appears after 2 or 3 so use an appropriate volume level. If the subwoofer attempts, contact your Onkyo dealer. has a low-pass filter switch, set it to Off or Direct. • Speaker Detect Error Refer to your subwoofer’s instruction manual for...
Page 27: Performing Wireless Lan Setup
Turning On & Basic Operations ■ PIN code method Performing Wireless LAN Setup Use / to select “Network Connection”, and to select “Wireless”, and then press 1. Use / to select “PIN Code” and then press ENTER (➔ page 72). ENTER.
Page 28 Turning On & Basic Operations Manual wireless LAN setup Select “OK” and press ENTER. Use / to select the Access Point you wish to Connection to your Access Point starts and Wi-Fi connect to, and then press ENTER. indicator flashes. After the connection to your Depending on your encryption settings, the Press RECEIVER followed by HOME.
Page 29: Playback
TV. Switching the input on the TV is also • “Controlling Other Components” (➔ page required. Select the input to which the AV • “Using the Onkyo Dock” (➔ page receiver is connected by using the TV remote controller. * For the CEC compatible TV and the AV components connected with HDMI connections, switching the input is automatically performed.
Page 30: Controlling Contents Of Usb Or Network Devices
Playback TOP MENU REPEAT Controlling Contents of USB or This button displays the top menu for each media or Press this button repeatedly to cycle through the repeat Network Devices service. modes. (➔ page / and ENTER These buttons navigate through the menus. •...
Page 31: Understanding Icons On The Display
Playback Pairing the AV receiver with a Bluetooth- Understanding Icons on the Display Playing an Audio from Bluetooth- enabled device enabled Device This section describes icons that appear on the AV Pairing is an operation where Bluetooth-enabled receiver’s display during media playback. About the Bluetooth Wireless Technology devices register with each other beforehand.
Page 32: Playing A Usb Device
• The model name appeared on the display of your The network service screen appears, and the Bluetooth-enabled device is “Onkyo TX-NR727”. This section explains how to play music files from a NET indicator lights. If it flashes, the AV receiver USB device (e.g., USB flash drives and MP3 players).
Page 33 Playback Setting an TuneIn account Category/Area, etc. Store your favorite stations or Use / to select a station or a program, and programs in this folder. then press ENTER. To create a user account for TuneIn, open a browser 1. Select radio stations or programs, and press Playback starts.
Page 34: Registering Other Internet Radio
Playback Click “Save” to save the Internet radio station. Registering Other Internet Radio Changing the Icon Layout on the The Internet radio station is then added to “My Network Service Screen You need to connect the AV receiver to your home Favorites”.
Page 35 Playback Windows Media Player Setup On the “Stream” menu, select “Turn on media Use / / / to select “DLNA”, and press streaming”. ENTER. ■ Windows Media Player 11 Setup A dialog box appears. Use / to select a server, and then press This section explains how to configure Windows ENTER.
Page 36: Playing Music Files On A Shared Folder
Playback ■ Creating a shared folder Playing music files on a shared folder Playing Music Files on a Shared Folder In order to enjoy Home Media, you must first create a Right-click the folder that you want to share. This section explains how to play music files on a shared folder on your computer.
Page 37: Remote Playback
Playback Click “OK” to close the dialog box. Adjusting the Volume. Remote Playback This completes the Windows Media Player 12 You can adjust the volume by adjusting the You need to connect the AV receiver to your home configuration. volume bar in the “Remote playback” window. network (➔...
Page 38: Listening To Am/Fm Radio
Playback ■ Tuning into stations by frequency Listening to AM/FM Radio Press TUNING / . You can tune into AM and FM stations directly by Searching stops when a station is found. entering the appropriate frequency. This section describes the procedure of using the buttons on the front panel, unless otherwise specified.
Page 39 Playback ■ ■ What is RDS? Displaying Radio Text (RT) Press MEMORY again to store the station or RDS stands for Radio Data System and is a method channel. Press RT/PTY/TP once. of transmitting data in FM radio signals. It was The station or channel is stored and the preset The RT information scrolls across the AV developed by the European Broadcasting Union...
Page 40: Playing Audio And Video From Separate Sources
Playback ■ Listening to Traffic News (TP) RDS program types (PTY) Playing Audio and Video from Separate Type Display Sources You can search for stations that broadcast traffic None None news. You can listen to the audio of one input source while News reports News watching the video of another.
Page 41: Using The Listening Modes
Playback PURE AUDIO button and indicator (North American and Taiwanese models) Using the Listening Modes (European, Australian and Asian models) This button selects the Pure Audio listening mode. About Listening Modes When this mode is selected, the AV receiver’s display The AV receiver’s listening modes can transform your and analog video circuitry are turned off.
Page 42 Playback ■ Input Source Onkyo-Original DSP Listening Modes The following audio formats are supported by the listening modes. Listening Mode Description Input Speaker Source Layout This is mono (monophonic) sound. Orchestra Suitable for classical or operatic music, This is stereo (stereophonic) sound. Two independent audio signal channels this mode emphasizes the surround are reproduced through two speakers.
Page 43 Playback Listening Mode Description Input Speaker Listening Mode Description Input Speaker Source Layout Source Layout T-D (Theater- With this mode you can enjoy a virtual In this mode, audio from the input source Dimensional) surround sound even with only two or is output without surround-sound D S D three speakers.
Page 44 Playback Listening Mode Description Input Speaker Listening Mode Description Input Speaker Source Layout Source Layout DTS-ES Matrix This mode is for use with DTS-ES Matrix Dolby Pro Logic IIz Dolby Pro Logic IIz Height is designed soundtracks, which use a matrix- Height to more effectively use existing program a t r i x...
Page 45 Playback Listening Mode Description Input Speaker Listening Mode Description Input Speaker Source Layout Source Layout Audyssey DSX • Audyssey DSX Founded by George Lucas, THX develops stringent standards that Audyssey DSX ® is a scalable system A u d s s e y D S X ensure movies are reproduced in movie that adds new speakers to improve...
Page 46 Playback Listening Mode Description Input Speaker Listening Mode Description Input Speaker Source Layout Source Layout • Dolby Pro Logic II/IIx Movie + THX • THX Select2 Cinema N e o T H X C i n e m a Cinema THX Select2 Cinema mode plays 5.1 •...
Page 47 Playback Listening Mode Description Input Speaker Source Layout • THX Surround EX T H X S u r r This mode expands 5.1-channel sources for 6.1/7.1- channel playback. It’s especially suited to Dolby Digital EX sources. THX Surround EX, also known as Dolby Digital Surround EX, is a joint development between Dolby Laboratories and THX Ltd.
Page 48 Playback Dialogue Normalization spatial errors that occur. On this product, when the be sure to go to the THX Audio Setup screen and THX indicator is on, THX features are automatically choose the setting that closely corresponds to the Dialogue Normalization (DialogNorm) is a feature of added in Cinema modes (e.g.
Page 49: Displaying Source Information
Playback Displaying Source Information Using the Sleep Timer Setting the Display Brightness You can display various information about the current With the sleep timer, you can set the AV receiver to You can adjust the brightness of the AV receiver’s input source as follows.
Page 50: Changing The Input Display
Using the Whole House Mode The Whole House Mode is useful when you want to When you connect an -capable Onkyo add extra background music to your home party; this component, you must configure the input display so allows you to enjoy the same stereo music as the that can work properly.
Page 51: Using The Home Menu
Playback components connected through HDMI, you can a short while after the AV receiver is turned on. Using the Home Menu easily switch between inputs as their previews are Please wait until it becomes operable. displayed on a single screen. Press ENTER to display the network service The Home menu provides quick access to frequently Press ENTER to display the main preview...
Page 52: Advanced Operations
Advanced Operations In addition, previews of the video streams coming Using the Quick Setup from HDMI inputs (HDMI IN 1/2/3/4/AUX INPUT) are displayed. Use / to select an input source and view the related information. Pressing ENTER switches to Advanced Operations the selected input source.
Page 53: Using The Audio Settings Of Quick Setup
Advanced Operations “Dynamic EQ” and “Dynamic Volume” cannot be Phase Matching Bass Using the Audio Settings of Quick selected when any of the THX listening modes is Setup selected, with “Loudness Plus” set to “On” or “Preserve ■ Phase Matching Bass THX Settings”...
Page 54 Advanced Operations Speaker Levels • The setting is stored individually for each input selector. • With Dolby TrueHD sources, the Late Night function cannot • “Dynamic EQ” and “Dynamic Volume” cannot be selected be used when “TrueHD Loudness Management” is set to when any of the THX listening modes is selected, with “Off”.
Page 55 Advanced Operations Re-EQ (Re-Equalization) Movie soundtracks were designed for playback in large movie theaters using professional equipment. If the movies were not remixed for the home theater, the tonal balance of the soundtracks can be excessively bright and harsh when played back over home audio equipment.
Page 56: Using The Setup Menu (Home)
Advanced Operations Main menu item Sub menu item Using the Setup Menu (HOME) Setup Menu Items 6. Miscellaneous Volume Setup (➔ page OSD Setup Main menu item Sub menu item Remote 7. Hardware Setup Tuner 1. Input/Output Assign Monitor Out indicator (➔...
Page 57: Input/Output Assign
Advanced Operations Explanatory Notes 1. Input/Output Assign Note • The “HDMI Through” setting is only available for the HDMI 2. Speaker Setup Monitor Out OUT MAIN jack (➔ page 70). ■ Resolution Speaker Configuration On the “Monitor Out” settings, you can select whether or not to have the video sources’...
Page 58 Advanced Operations ■ HDMI Input BD/DVD, CBL/SAT, STB/DVR, GAME, PC, TV/CD, Component Video Input PHONO If you connect a video component to an HDMI input, If you connect a video component to a component HDMI1, HDMI2, HDMI3, HDMI4, HDMI5, HDMI6, you must assign that input to an input selector.
Page 59: Speaker Setup
Advanced Operations ■ Digital Audio Input Speakers Type (Front) 2. Speaker Setup Normal: If you connect a component to a digital audio input, Select this if you’ve connected your front Here you can check the settings made by you must assign that input to an input selector. For speakers normally.
Page 60 Advanced Operations ■ Subwoofer If anything else than “None” is selected in “Surround Note Back”, this setting is automatically set to “None”. • When the “Subwoofer” setting is set to “No” or the “Front” ■ Surround Back Ch setting to anything other than “Full Band”, this setting is fixed to “- - -”.
Page 61 Advanced Operations Level Calibration Equalizer Settings THX Audio Setup With the Equalizer settings, you can adjust the tone of ■ Surr Back Speaker Spacing speakers individually with a 5-band equalizer. The This setting is set automatically by <1ft (<0.3m) volume of each speaker can be set. Audyssey MultEQ ®...
Page 62: Audio Adjust
Advanced Operations ■ Loudness Plus Dolby 3. Audio Adjust ■ With the Audio Adjust functions and settings, you can PL IIx Music (2ch Input) adjust the sound and listening modes as you like. These settings apply to only 2-channel stereo When the “Loudness Plus”...
Page 63 Advanced Operations ■ ■ PL IIz Height Gain TrueHD Loudness Management Theater-Dimensional ■ Listening Angle Wide: High This setting specifies whether or not to apply the Late Night processing on a Dolby TrueHD source. Select if the listening angle is greater than 30 The Height Gain Control in Dolby Pro Logic IIz degrees.
Page 64: Source Setup
Advanced Operations ■ DTS and DTS-HD High Resolution sources Dynamic EQ at reference level when the master volume control is DSD (Super Audio CD) sources set to the 0 dB position. At that level you can hear the mix as the mixers heard it. 4.
Page 65 Advanced Operations About Audyssey Dynamic EQ ® IntelliVolume – “HDMI CEC (RIHD)” is set to “On” (➔ page 69) and you’re listening through your TV speakers. Audyssey Dynamic EQ solves the problem of • A/V Sync is disabled when the Pure Audio (European, ■...
Page 66 Advanced Operations Picture Adjust mode. See “Monitor Out” for details on the Name input area monitor output setting (➔ page 57). Using Picture Adjust, you can adjust the picture ■ Picture Mode 4 - 4. Name Edit BD/DVD quality and reduce any noise appearing on the Name Custom: screen.
Page 67 Advanced Operations ■ ■ Film Mode Audio Selector *2*4 *1*2*4 Video: –50 to 0 to +50 ■ “Film Mode” detection is not applied and the With this setting, you can adjust the color hue Audio Selector input signal is handled as a video source. between “–50”...
Page 68: Listening Mode Preset
Advanced Operations Setting the Incoming Digital Signal (Fixed • For the “BLUETOOTH” input selector, only “Digital” is 5. Listening Mode Preset Mode) available. You can assign a default listening mode to each input ■ Analog/PCM/Digital ■ source that will be selected automatically when you Fixed Mode With this setting, you can specify the listening mode select each input source.
Page 69: Miscellaneous
Advanced Operations ■ Headphone Level 6. Miscellaneous 7. Hardware Setup –12dB to 0dB to +12dB With this setting, you can specify the headphone Volume Setup Tuner volume relative to the main volume. This is useful if there’s a volume difference between your speakers ■...
Page 70 Advanced Operations ■ ■ HDMI Through Audio TV Out (Main) Note • When the setting is set to “On” and the menu is closed, the BD/DVD, CBL/SAT, STB/DVR, GAME, PC, AUX, names of connected -compatible components and TV/CD, PHONO: This preference determines whether the incoming “RIHD On”...
Page 71 Advanced Operations ■ ■ ■ Audio TV Out (Sub) Audio Return Channel InstaPrevue These settings apply to “InstaPrevue” of the Home menu and specify the preview display of Auto: (➔ page HDMI video streams. The audio signal from your TV tuner can be sent This preference determines whether the incoming to HDMI OUT MAIN of the AV receiver.
Page 72 Advanced Operations ■ Default setting: On (European, Australian and Network MAC Address Asian models), Off (North American and This is the AV receiver’s MAC (Media Access This section explains how to configure the AV Taiwanese models) Control) address. This address cannot be changed. receiver’s network settings manually.
Page 73: Remote Controller Setup
Note 1, 2, or 3 • This setting cannot be selected if you’ve selected NET or When several Onkyo components are used in the This setting enables or disables control over the USB as input selector in Multi Zone. same room, their remote ID codes may overlap. To network.
Page 74: Multi Zone
Advanced Operations Multi Zone In addition to the main listening room, you can also enjoy playback in the other room, or as we call Multi Zone. And, you can select a different source for each room. Making Multi Zone Connections Connecting Your Zone 2 Speakers Directly to the AV receiver Connecting the Zone Speakers to an Additional Amplifier This setup allows you to select different sources for Main room and Zone 2.
Page 75: Controlling Multi Zone Components
Advanced Operations Muting Zone 2 Controlling Multi Zone Components RECEIVER ■ ■ Operating on the AV receiver Operating on the remote controller INPUT SELECTOR Input selector buttons Press ZONE2 followed by MUTING. ZONE 2 ZONE 3 MASTER VOLUME MUTING ZONE2 ZONE3 VOL / •...
Page 76: Controlling Other Components
If the desired brand name is not found: assigned for the REMOTE MODE buttons. However, BD/DVD Onkyo Blu-ray Disc player (➔ page these buttons also work as input selector buttons, so to select “Not Listed”, and then press...
Page 77: Remapping Colored Buttons
Controlling Onkyo components without Resetting the Remote Controller • If any other button than the colored buttons is pressed, the If you want to control an Onkyo component by operation will be cancelled. pointing the remote controller directly at it, or you You can reset the remote controller to its default •...
Page 78: Controlling Other Components
Controlling Other Components Controlling MHL-Enabled Mobile Device Controlling Other Components Press the appropriate REMOTE By programming the supplied remote controller with MODE button first. By pressing the REMOTE MODE button that’s been the appropriate remote control code, you can use it to programmed with the remote control code for your operate your MHL-enabled mobile device.
Page 79 Controlling Other Components ■ ■ ■ TV operation DVD player/DVD recorder operation Satellite receiver/Cable receiver operation Available buttons Available buttons Available buttons Number: 1 to 9, 0 TOP MENU GUIDE , INPUT, TV VOL / SOURCE SOURCE GUIDE DISPLAY DISPLAY Number: +10 / / / , ENTER / / / , ENTER...
Page 80: Using The Onkyo Dock
AV receiver will RI Dock For the latest information on the Onkyo Dock automatically switch to the input to which the RI Dock components, see the Onkyo web site at: With the RI Dock, you can easily play the music of is connected.
Page 81: Controlling Your Ipod/Iphone
DS-A2 RI Dock. code (without ). In this case, make an This button does not turn the Onkyo DS-A2 or DS-A2X connection and enter the remote control code 81993 RI Dock on or off. Also, your iPod/iPhone may not...
Page 82: Appendix
Make sure that the polarity of the speaker cables is correct, AV receiver before contacting your Onkyo dealer. and that the bare wires are in contact with the metal part of Unplug the power cord from the wall outlet, wait five To reset the AV receiver to its factory defaults, turn it each speaker terminal.
Page 83 Appendix ■ The front high and surround back speakers If the input signal format is set to “PCM” or “DTS”. Set it to If the volume level of each individual speaker has been produce no sound “Off”. (➔ page adjusted to high positive values, then the maximum master volume possible may be reduced.
Page 84 (➔ pages ■ Can’t control other components Move the AV receiver away from your TV or computer. If it’s an Onkyo component, make sure that the cable Listen to the station in mono. (➔ page (European, Australian and Asian models) While the and analog audio cable are connected properly.
Page 85 (➔ page Try resetting your iPod/iPhone. electromagnetic waves. To control an Onkyo component that’s not connected via Depending on your iPod/iPhone, some buttons may not When other wireless LAN devices are used near the AV , point the remote controller at the component. Be sure work as expected.
Page 86 Appendix ■ ■ ■ Bluetooth connection cannot be built Can’t connect to the AV receiver from a Web The sound changes when I connect my browser headphones When building a Bluetooth connection between the AV receiver and your Bluetooth-enabled device for the first If you’re using DHCP, your router may not always allocate When a pair of headphones is connected, the listening time, if the connection is fail, you need to power off your...
Page 87 Appendix On the AV receiver, press the input selector for the • We assume no responsibility whatsoever for any Radio Wave Caution input source that you want to set and the HOME error or damage of network environment or access button simultaneously.
Page 88 LAN device. • We assume no responsibility whatsoever for any Onkyo is not responsible for damages (such as CD damages resulting from the use of this apparatus rental fees) due to unsuccessful recordings caused except in the cases deemed acceptable under the by the unit’s malfunction.
Page 89 Appendix DISCLAIMER Video Resolution Chart Through this device you are able to link to other services or websites which are not under the control of any company which has designed, manufactured or distributed/have distributed this The following tables show how video signals at different resolutions are output by device, and its affiliates (collectively, “Company”).
Page 90: Firmware Update
(➔ page 69). choose from the following two methods: update via own risk. Onkyo will not be liable and you will have • Turn off the controller device connected via network. network, or update via USB storage. Choose the one no remedy for damages for any claim of any kind •...
Page 91 Onkyo Support. Errors during an update via network Congratulations! You now have the latest Error Code Description firmware installed on your Onkyo AV receiver. Updating the Firmware via USB -01, The Ethernet cable was not detected. Reconnect the cable properly.
Page 92 (Alpha-numeric characters on the program. When this occurs, you can still view the front display are denoted by asterisks.) Refer to the Download the firmware file from the Onkyo update progress on the AV receiver’s display. following table and take appropriate action.
Page 93: About Hdmi
Appendix About HDMI Supported Audio Formats About Copyright Protection • 2-channel linear PCM (32–192 kHz, 16/20/24 bit) The AV receiver supports HDCP (High-bandwidth Designed to meet the increased demands of digital Digital Content Protection) , a copy-protection TV, HDMI (High Definition Multimedia Interface) is a •...
Page 94: Network/Usb Features
■ • Onkyo accepts no responsibility whatsoever for the loss or Internet Access (for Internet radio) ■ damage to data stored on a USB device when that device...
Page 95 Appendix ■ ■ • Operation is not guaranteed for all USB devices, which WMA Lossless (.wma or .WMA) LPCM (Linear PCM) includes the ability to power them. • Sampling rates of 44.1 kHz, 48 kHz, 88.2 kHz, • Sampling rates of 8 kHz, 11.025 kHz, 12 kHz, •...
Page 96: License And Trademark Information
Audyssey DSX trademarks owned by Bluetooth SIG, Inc. and any use of registered trademarks of Audyssey Laboratories,Inc. and other countries.” such marks by Onkyo is under license. Other trademarks and trade names are those of their respective owners. “DLNA ®...
Page 97: Specifications
Appendix Specifications Video Section Frequency band 2.4 GHz band (2.4000 GHz - 2.4835 GHz) Modulation method FHSS (Freq Hopping Spread Spectrum) Input Sensitivity/Output Level and Impedance Amplifier Section Compatible Bluetooth profiles 1 Vp-p/75 Ω (Component Y) 0.7 Vp-p/75 Ω (Component P A2DP 1.2 (Advanced Audio Distribution Profile) Rated Output Power...
Page 98 Appendix ■ HDMI Input IN 1, IN 2, IN 3, IN 4, IN 5, IN 6, IN 7, AUX INPUT Output OUT MAIN, OUT SUB Video Resolution Audio Format Dolby TrueHD, DTS-HD Master Audio, DVD-Audio, DSD Supported 3D, Audio Return Channel, DeepColor, x.v.Color, LipSync, CEC (RIHD), 4K (up- scaling and Passthrough) ■...
Page 99 Appendix Memo En-99...
Page 100 Tel: 86-21-52131366 Fax: 86-21-52130396 http://www.cn.onkyo.com/ Asia, Oceania, Middle East, Africa Please contact an Onkyo distributor referring to Onkyo SUPPORT site. http://www.intl.onkyo.com/support/ The above-mentioned information is subject to change without prior notice. Visit the Onkyo web site for the latest update.
Page 101 Using Internet Radio Using Internet Radio Using Multiple Accounts Pandora ® internet radio The AV receiver supports multiple user accounts, –Getting Started (U.S. only)..... 2 which means you can freely switch between several Common Procedures in Internet Radio logins. After registering user accounts, login is Menu performed from the “Users”...
Page 102 Pandora uses to create your personal radio After you have created your account and stations stations. you can return to your Onkyo receiver and press I’m tired of this track: PANDORA, the PANDORA logo, and the Pandora enter to begin listening to your personalized...
Page 103 Music Guide: remote control. account at You can play tracks from Genres, Top Artists, Enabled buttons: www.rhapsody.com/onkyo Top Albums, Top Tracks, New Releases, and , RANDOM, REPEAT If you have an existing Rhapsody account, select Staff Picks. Note “Sign in to your account”...
Page 104 If you have an existing SIRIUS account, you can The playback screen for the selected channel Your Onkyo AV receiver includes a free trial of sign in by selecting “Sign In”. Enter your user appears and you can listen to SiriusXM Internet SiriusXM Internet Radio.
Page 105 “Sign in to your Account Info: Your new Onkyo AV receiver is very clever. If you account”. Enter your user name and password in Confirm your account information. have a free Last.fm account, it will keep track of all the next keyboard screen.
Page 106 Using Internet Radio You can control the tracks with the buttons on Using Slacker Personal Radio the remote control. If you do not have an account, create one on Enabled buttons: the Slacker website (www.slacker.com) with ■ Menu Items your computer. Rate Song as Favorite: If you already have a Slacker account, select Stores information to server, making it more likely...
Page 107 Using Internet Radio Playing Contents on the AV Receiver The track at the top of the music list is automatically Using MP3tunes played back. Listen to your music collection on your home stereo in Use / to select a track and press ENTER or complete digital fidelity without a personal computer •...
Page 108 Utilisation d’une webradio Utilisation d’une Utilisation de plusieurs comptes Pandora ® internet Radio L’ampli-tuner AV prend en charge plusieurs comptes –Pour commencer webradio utilisateur, ce qui signifie que vous pouvez librement (États-Unis uniquement)......2 commuter entre plusieurs connexions. Après avoir enregistré...
Page 109 « au repos » et Pandora ne la lira compte et de vos stations, vous pouvez retourner plus pendant un mois. à votre récepteur Onkyo et appuyez sur entrée Create station from this artist : PANDORA, le logo PANDORA, et l’habillage pour écouter votre webradio Pandora...
Page 110 à partir de , RANDOM, REPEAT albums, des meilleures pistes, des nouveautés et www.rhapsody.com/onkyo Remarque des sélections du personnel. Si vous possédez déjà un compte Rhapsody, • Sur les canaux Rhapsody, certaines touches ne Rhapsody Channels : sélectionnez «...
Page 111 L’écran de lecture du canal sélectionné s’affiche pouvez y accéder en sélectionnant « Sign In ». et vous pouvez écouter SiriusXM Internet Radio. Votre ampli-tuner AV Onkyo comprend un essai Saisissez votre nom utilisateur et votre mot de gratuit de SiriusXM Internet Radio. L’écran « Account Vous pouvez contrôlez les pistes avec les...
Page 112 « Neighbours ». pouvez vous y connecter pour sélectionner Votre nouvel ampli-tuner AV Onkyo est très intelligent. « Sign in to your account ». Saisissez votre Account Info : Si vous avez un compte Last.fm gratuit, il garde une nom utilisateur et votre mot de passe dans Vérifiez les informations de votre compte.
Page 113 Utilisation d’une webradio Vous pouvez contrôlez les pistes avec les Utilisation de Slacker Personal Radio touches sur la télécommande. Si vous ne possédez pas de compte, créez-en Boutons activés : un à partir du site Web de Slacker ■ Eléments du menu (www.slacker.com) à...
Page 114 Uso de Internet Radio Uso de Internet Radio Uso de múltiples cuentas Pandora ® Internet Radio El receptor de AV permite múltiples cuentas de –Primeros pasos (solo EE.UU.)....2 usuario, lo que quiere decir que se puede cambiar Procedimientos comunes en el menú libremente entre varios usuarios.
Page 115 Una vez creada su cuenta y sus I’m tired of this track: PANDORA, el logotipo de PANDORA logo, y la emisoras, puede regresar al receptor Onkyo y Si se cansa de un tema, puede “silenciarlo” de imagen corporativa de Pandora son marcas...
Page 116 Para utilizar Rhapsody, necesitará una cuenta. Si todavía no tiene una, puede crear una nueva en Music Guide: Puede controlar las pistas con los botones del www.rhapsody.com/onkyo mando a distancia. Puede reproducir canciones por géneros, artistas Si ya tiene una cuenta Rhapsody, seleccione principales, álbumes principales o canciones...
Page 117 Aparecerá la pantalla de reproducción de la seleccionando “Sign In”. Escriba su nombre de emisora seleccionada y ahora usted podrá Su receptor de AV Onkyo incluye una prueba gratuita usuario y contraseña en la pantalla de teclado escuchar SiriusXM Internet Radio.
Page 118 “Uso de múltiples cuentas” (➔ página 1). Se Ban this track: Radio sin anuncios en su receptor de AV Onkyo sin puede iniciar sesión desde la pantalla “Users”. Se guarda la información sobre la canción en el necesidad de un ordenador.
Page 119 Uso de Internet Radio Puede controlar las pistas con los botones del Uso de Slacker Personal Radio mando a distancia. Si no tiene una cuenta, cree una en el sitio web Botones activados: de Slacker (www.slacker.com) con su ■ Elementos del menú ordenador.
Page 120 Y1212-1 SN 29401478IRUS * 2 9 4 0 1 4 7 8 I R U S *...
Page 121 Using Internet Radio Using Internet Radio Using Multiple Accounts The AV receiver supports multiple user accounts, Using Last.fm Internet Radio ......2 which means you can freely switch between several Common Procedures in Internet Radio logins. After registering user accounts, login is Menu performed from the “Users”...
Page 122 “Sign in to your Account Info: Your new Onkyo AV receiver is very clever. If you account”. Enter your user name and password in Confirm your account information. have a free Last.fm account, it will keep track of all the next keyboard screen.
Page 123 Internetradio verwenden Internetradio verwenden Verwendung mehrerer Konten Der AV-Receiver unterstützt mehrere Nutzerkonten, Verwendung von Last.fm Internet Radio ..2 was bedeutet, dass Sie frei zwischen mehreren Allgemeine Verfahren bei den Logins umschalten können. Nach der Anmeldung der Nutzerkonten wird das Login vom „Users“ Bildschirm Internetradio-Menüs aus vorgenommen.
Page 124 Verwenden Sie / , um „Sign in to your Lieblingsmusik merkt... Library“, „Your Neighbourhood“ und „Your account“ auszuwählen und dann drücken Sie Recommendations“). Ihr neuer Onkyo AV-Receiver ist äußerst clever. Wenn Sie ENTER. ein kostenloses Last.fm-Konto eingerichtet haben, werden Profile: Wenn Sie über einen bestehenden Last.fm Konto darin alle kürzlich abgespielten Titel gespeichert.
Page 125 Remote Control Codes Remote Control Codes While holding down the REMOTE MODE button to which you want to assign a code, press and hold down [DISPLAY] (about 3 seconds). The REMOTE MODE button/Remote indicator lights. On Integra products, button names are capitalized. For example, “Remote Mode” button and “Display”...
Page 126 Remote Control Codes Codes de télécommande Códigos de control remoto Tout en maintenant enfoncé le bouton REMOTE MODE auquel vous souhaitez Manteniendo pulsado el botón REMOTE MODE para el cual desea introducir un associer un code, pressez et maintenez enfoncé le bouton [DISPLAY] (pendant código, pulse y mantenga presionado el botón [DISPLAY] (aproximadamente 3 environ 3 secondes).
Page 127 Remote Control Codes Codici del telecomando Fernbedienungscodes Tenendo premuto il tasto REMOTE MODE al quale si desidera assegnare il Halten Sie die REMOTE MODE-Taste gedruckt, fur die Sie den Code eingeben codice, premere e tenere premuto [DISPLAY] (per circa 3 secondi). mochten, und drucken Sie (ca.
Page 128 Remote Control Codes Afstandsbedieningscodes Fjärrstyrningskoder Houd terwijl u de REMOTE MODE toets ingedrukt houdt waarvoor u een code Håll ned knappen för det REMOTE MODE som du vill tilldela en kod samtidigt wilt toewijzen de [DISPLAY] toets ingedrukt (ongeveer 3 seconden). som du trycker och håller ned [DISPLAY] (i cirka 3 sekunder).
Page 129 Remote Control Codes 遥控代码按住想指定编码的 REMOTE MODE （遥控模式）按钮的同时，按住 [DISPLAY （显示）] （大约 3 秒钟）。 REMOTE MODE （遥控模式）按钮 / 遥控指示灯亮起。 Integra 产品上的按钮名称单词首字母大写。例如， “Remote Mode （遥控模式） ”按钮和 “Display （显示） ”按钮。注意： • [RECEIVER （接收机）] 和多区域按钮不能输入遥控编码。 • • 只能为 [TV （电视）] 输入电视遥控编码。 •...
Page 130 Remote Control Codes Cable Set Top Box Cable Set Top Box Cable Set Top Box Cable/PVR Combination 02254, 02769 Neuf TV 03107 Visiopass 00817 Time Warner 01376, 01877, 02187 02769 Noos 00817 01376 01582 Arris 02187 01068, 01060 WideOpenWest 01877 Videotron 01877 AT&T...
Page 131 Remote Control Codes IPTV/PVR Combination Neuf TV 03107 Harman/Kardon 70157 Rotel 70157 Onkyo 70868 Philips 02294 Hitachi 70032 70157 Sony 70490, 70000 Scientific Atlanta 00858 Integra 71817, 70101 Sansui 70157 TEAC 72977 03107 70072 SAST 70157 Yamaha 70490 Verizon 02378...
Page 132 82228 Alba 01284 Centrex 01457 Durabrand 01284 Logitech 82182 Allvision 01334 01413, 01567 Echostar 00775, 00853, 01323, 01409, 02527 Onkyo 82990, 81993, 82351 Amstrad 00847, 01175, 01662, Chess 01334, 01626 01693 Eco-Star 01413 Polk Audio 82228 CityCom 01176 Ansonic 02418...
Page 133 Remote Control Codes Satellite Set Top Box Satellite Set Top Box Satellite Set Top Box Satellite Set Top Box Hama 01567 Leiko 01626 Pace 00847, 00853, 00887, Sat Industrie 01611 01175, 01323, 01356, Hanseatic 01100 Lemon 01334 SAT+ 01409 01423, 01662, 01693, Hirschmann 00173 Lenoxx...
Page 134 Remote Control Codes Satellite Set Top Box Satellite Set Top Box SAT/PVR Combination SAT/PVR Combination Star 00887 00642 Canal+ 02657 SKY Deutschland 02754 Stream System 01300 00879, 01356 CanalSat 02657 SKY Italia 01693, 01850 Strong 00853, 00879, 01284, United 01251, 01626, 02418 Cyfrowy Polsat 02527 SKY New Zealand...
Page 135 Remote Control Codes Television Television Television Television Akura 10171, 10037, 10714, Belstar 11037 Classic 10499 DMTech 12001 10668, 11037, 11363, Beon 10037 Clatronic 10037, 10714, 11324 Domeos 10668 11585, 11667, 11709 Berthen 10556, 10668 Clayton 11037 Drean 10037 Alba 10037, 10714, 10668, Bestar 10037 Condor...
Page 136 Remote Control Codes Television Television Television Television Ferguson 10037, 10625, 10560, Goodmans 10556, 10037, 10625, Hoeher 10714 Karcher 10714, 11324 10195, 11037, 11585 10714, 10560, 10668, Hornyphon 10037 Kathrein 10556 10634, 11037, 10499, Fidelity 10171, 10037, 10512 Hugoson 11666 Kendo 10037, 11037, 11585 11585, 11667 Finlandia...
Page 137 10556, 10037 10178, 10037 Phocus 10714, 11652 Onix 10698 Medion 10556, 10037, 10714, Naiko 10037 Phoenix 10037 Onkyo 11807, 13100, 13500 10668, 11037, 10698, Nakimura 10037 Phonola 10556, 10037 10512, 11248, 11585, 11667, 11709 National 10508, 10208 11667, 12001, 12719...
Page 138 Remote Control Codes Television Television Television Television Profitronic 10037 Rowa 10037, 10698 Siera 10556, 10037 Svasa 10208 Proline 10037, 10625, 10634, Saba 10625, 10714, 10560 Silva 10037 Swisstec 11614, 11775 11037 Sagem 10618 Silva Schneider 10037 Sylvania 10171, 11394, 11864, Prosonic 10037, 10714, 10668, 11886...
Page 139 Remote Control Codes Television Television Television Telefunken 10037, 10625, 10714, Ultravox 10037 Wharfedale 10556, 10037, 11324, ReplayTV 20616 10560, 10698, 11585, 11667 11614, 11775 Sonic Blue 20616 11667 White Westinghouse 10037 Unic Line 10037 TiVo 20739 Telefusion 10037 Wilson 10556 Uniden 12122 Telegazi...
Page 140 30741 Durabrand 30675, 30713 Irradio 30646 Sanyo 30713 30741, 31602 Dynex 32596 30503, 30539, 30623, Schneider 30539, 30646, 30713 30867, 31597, 31602, Onkyo 30503, 30627, 31612, Dyon 33052 Schoentech 30713 32855 32147, 30571, 31634 eBench 31152 Scott 31394 Kendo 30713...
Page 141 32414, 32432, 33444 SilverCrest 31152 Victor 31597 Philips 30646, 31340 Momitsu 33052 Skantic 30539, 30713 Vizio 32563 Pioneer 30631, 32860 Onkyo 32147, 32900, 32910, SM Electronic 31152 Vtrek 32587 33100, 33101, 33500, 30646 Smart 30713 33501 Waltham 30713 30522 Sony...
Page 142 Remote Control Codes TV/DVD Combination TV/DVD Combination Centrum 11037, 30713 Sunstech 12001 Crown 11037, 30713 Sylvania 10171, 11394, 11864, 11886, 30630, 30675 DMTech 12001 TEAC 10698 Dual 11037, 30713 Technica 11037, 30713 Dynex 12049 Telefunken 10698 Elfunk 11037, 30713 Teletech 11037, 30713 Emerson 11394, 11864, 11886,...
Page 143 Remote Control Codes Memo...

Onkyo TX-NR727 Owner's Manual

Quick Links

Need help?

Questions and answers

Related Manuals for Onkyo TX-NR727

Summary of Contents for Onkyo TX-NR727

Table of Contents