Drill Master 95065 Set Up And Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Drill Master Manuals
  4. Power Screwdriver
  5. 95065
  6. Set up and operating instructions manual

Drill Master 95065 Set Up And Operating Instructions Manual

4.8 volt rechargeable cordless screwdriver
Hide thumbs
Table of Contents

Advertisement

Quick Links

4.8 VOLT RECHARGEABLE
CORDLESS SCREWDRIVER
SET up AnD OpERATInG InSTRuCTIOnS
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MAnuAL.
Copyright
©
2006 by Harbor Freight Tools
artwork contained herein may be reproduced in any shape or form without the express written
consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described
herein. Tools required for assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Model
Visit our website at: http://www.harborfreight.com
95065
®
. All rights reserved. No portion of this manual or any
Manual Revised 10d

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 95065 and is the answer not in the manual?

Questions and answers

Related Manuals for Drill Master 95065

Summary of Contents for Drill Master 95065

  • Page 1 4.8 VOLT RECHARGEABLE CORDLESS SCREWDRIVER Model 95065 SET up AnD OpERATInG InSTRuCTIOnS Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MAnuAL. Copyright © 2006 by Harbor Freight Tools ®...

  • Page 2: Specifications

    SpECIFICATIOnS and sparks. Provide barriers or shields as needed. Batteries 4.8 V NiCd Battery Pack Charging Time No more than 10 hours Electrical Safety Charger Adapter Input: 120 VAC, 60 Hz Output: 6 VDC, 300 mA Avoid body contact with grounded Speed 200 RPM surfaces such as pipes, radiators,...

  • Page 3: Personal Safety

    When operating a power tool Tool use and Care outside, use an outdoor extension use clamps (not included) or other cord marked “W-A” or “W”. These practical ways to secure and support extension cords are rated for outdoor the workpiece to a stable platform. use, and reduce the risk of electric Holding the work by hand or against shock.

  • Page 4: Vibration Hazard

    Service Include vibration-free periods each day of work. Tool service must be performed by qualified repair personnel. Service Grip tool as lightly as possible (while performed by unqualified personnel still keeping safe control of it). Let the tool do the work. could result in a risk of injury.

  • Page 5: Grounded Tools: Tools With Three Prong Plugs

    Do not force the Cordless Grounded Tools: Screwdriver. This tool will do the work Tools with Three prong plugs better and safer at the capacity for Tools marked with “Grounding which it was designed. Required” have a three wire cord unplug the Charger Adapter and three prong grounding plug.

  • Page 6: Extension Cords

    Make sure the extension cord is properly wired and in good electrical condition. Always replace a damaged extension cord or have it repaired by a qualified electrician before using it. Protect the extension cords from sharp objects, excessive heat, and damp or wet areas.

  • Page 7: Battery Precautions

    unpACKInG When unpacking, make sure that all the parts are included. See Figure C below. Figure C Charger Adapter Screwdriver Bits Cordless Screwdriver If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible. Battery precautions To avoid accidents, never use a different charger adapter with this tool.

  • Page 8: Charging The Battery

    CHARGInG THE BATTERy Insert the Charger Adapter (24) cord plug into the unit connector as shown below. Plug the Charger Adapter module into an electrical outlet. The red Charging Indicator on the Cordless Screwdriver will light. Charge the new battery for 10 hours. When the battery is fully charged all three LEDs will light up.

  • Page 9: Troubleshooting

    TROuBLESHOOTInG problem possible Cause probable Solution Cordless Screwdriver does Battery Pack is not charged. Recharge Battery Pack. not operate when Trigger Switch is pressed. Battery Pack does not No power to Charger Check electrical outlet for recharge after connecting Adapter. power.

  • Page 10: Parts List

    pARTS LIST part Description part Description Output Axis Motor Gasket Trigger Switch Gearbox Housing (left / right) Ring, Inner, Self-lock LED Indicator Core, Inner, Self-lock Light Cover Block, Self-lock Light Bulb Gear, Front Star Switch, Light Holder, Star Gear, Middle Connector Pin Gear, Star, Back Gasket, Large...

  • Page 11: Limited 90-Day Warranty

    LIMITED 90 DAy WARRAnTy Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.

Table of Contents