Features Accessories • Remote controlled colour LCD TV. INFO • Fully integrated digital TV (DVB-T). SLEEP SCREEN SOURCE PRESETS • HDMI connector for digital video and audio. This connection is also designed to accept high defi nition signals. • USB input. RETURN MENU •...
DO consult your dealer if you are ever in doubt Introduction about the installation, operation or safety of Thank you for choosing this product. This your equipment. manual will guide you for the proper DO be careful with glass panels or doors on operation of your TV.
normally, or if it is damaged in any way - switch Cleaning off, withdraw the mains plug and consult Before cleaning, unplug the your dealer. adaptor from the wall outlet. Do not use liquid or aerosol ABOVE ALL cleaners Use soft and dry cloth. --- NEVER let anyone especially children push anything into holes, slots or any other opening in the case - this could result in a...
materials, such as foil bag, must be kept away LCD Screen from children. The LCD panel is a very high technology product • Batteries, including those which are heavy with about a million thin fi lm transistors, giving metal-free, should not be disposed of with you fi...
Overview of the Remote Control Standby Image size INFO Sleep timer Numeric buttons Return / TXT Index SLEEP SCREEN SOURCE PRESETS Cursor up / TXT up page Cursor left / TXT sub page Programme up Programme down Mono-Stereo / Dual I-II Swap Electronic programme guide (in DTV mode)
LCD TV and Operating Buttons FRONT VIEW Standby button TV/AV button Programme Up/ Down buttons Volume Up/Down buttons Switch is used for turning the TV on or off. “ ” / Note: Press “ ” buttons at the same time to view main menu.
Viewing the Connections- Back Connectors SCART socket inputs or outputs for external devices. Connect the SCART cable between SCART socket on TV and SCART socket on your external device (such as a decoder, a VCR or a DVD player). Note: If an external device is connected via the SCART socket, the TV will automatically switch to AV mode.
Page 11
RF Input connects to an antenna or a cable. Note that if you use a decoder or a media recorder, you should connect the aerial cable through the device to the television with an appropriate antenna cable, as shown in the illustrationin the following pages.
Viewing the Connections - Side Connectors CI Slot is used for inserting a CI card. A CI card allows you to view all the channels that you subscribe to. For more information, see “Common Interface” section. Headphone jack is used for connecting an external headphone to the system.
Power Connection IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz. • After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains. • Plug the power cable to the mains socket outlet. Aerial Connection •...
Connecting the LCD TV to a PC For displaying your computer’s screen image on your LCD TV, you can connect your computer to the TV set. • Power off both computer and display before making any connections. • Use 15-pin D-sub display cable to connect a PC to the LCD TV. •...
Connecting to a DVD Player If you want to connect a DVD player to your LCD TV, you can use connectors of the TV set. DVD players may have different connectors. Please refer to your DVD player’s instruction book for additional information.
Using Side AV Connectors You can connect a range of optional equipment to your LCD TV. Possible connections are shown below. Note that cables shown in the illustration are not supplied. • For connecting a camcorder, connect to the VIDEO IN socket and the AUDIO SOCKETS. For selecting the related source, see the section “Input selection”...
Using Other Connectors You can connect a range of optional equipment to your LCD TV. Possible connections are shown below. Note that cables shown in the illustration are not supplied. • For connecting a to a device that has SPDIF support, use an appropriate SPDIF cable to enable sound connection.
Connecting Other Equipment via Scart Most devices support SCART connection. You can connect a; DVD recorder, a VCR or a decoder to your LCD TV by using the SCART socket. Note that cables shown in the illustration are not supplied. Power off both the TV and the devices before making any connections.
Inserting Batteries in the Switching the TV On/Off Remote Control Handset To Switch the TV On • Remove the battery cover located on the back • Connect the power cord to the 220-240V AC of the handset by gently pulling backwards 50 Hz.
AV Mode Input Selection • Press the “ TV/AV ” button in the control panel Once you have connected external systems on the TV to switch between AV modes. to your TV, you can switch to different input Operation with the Remote Control sources.
The IDTV will automatically tune to the UHF Initial Settings or VHF(*) (* for EU countries) transmission When the TV set is operated for the fi rst time, channels, searching for digital terrestrial the IDTV turns on fi rst. TV broadcasts and displaying the names of Because this is the fi...
General Operation Electronic Programme Guide (EPG) Press the SOURCE button on the remote control and select DTV/USB to switch the TV set to • Some, but not all, channels send information digital terrestrial television broadcasting. about the current and next events. Information Banner •...
• Press “0” button on the remote control to view Follow the instructions displayed on digital Guide Search menu. Using this feature, you teletext screen. can search the programme guide database • When Press “SELECT” button or similar in accordance with the genre selected or with message appears on the screen, press the name match.
while the “Select” item on Channel List menu is IDTV Menu System highlighted by using “ ” or “ ” button. The IDTV menu can only be viewed when Then the name and number of the selected watching digital terrestrial broadcasting. Use the channel will be displayed in the top-left and SOURCE button to select DTV mode.
Press the “MENU” button to cancel the editing or OK button to save the new name. Adding Locks to Channels Channel locking provides a password-protected access to channels selected by parents. In order to lock a channel you should know the parental lock password (default value is set to 0000 in the factory and can only be changed from the Confi...
How to Add a Channel to a Favourites List To display timers window, activate the item from the main menu. To add a timer, press the • By pressing “ ” or “ ” buttons, highlight the YELLOW button on the remote control. Then channel that you want to add to the favourite “Add Timer”...
• Insert the CAM and then the viewing card to the Setup slot that is located in the terminal cover at the The adjustments in this menu are given as the left-hand side of the TV (from front view). following: •...
channels. If you select “Radio Only”, with the “ • Press “MENU” button and using the “ ” or ” or “ ” buttons, you navigate through only “ ” buttons to choose Setup and press the radio channels. If you select “Text Only”, with OK button.
Menu Lock Use “ ” or “ ” buttons to change the Time Zone between GMT-12 or GMT+12. Current Time In menu lock you can set locking for all menus, on the top of the menu list will then change or the Installation Menu to restrict access to according to the selected Time Zone.
Language Language Settings In this menu the user can adjust the preferred language. Language is changed by pressing OK button. In the configuration menu, highlight the Language Settings item by pressing “ ” or “ ” buttons. Press OK and Language Settings submenu will be displayed on the screen: Use “...
Automatic Channel Scan After APS is fi nalized, the programme table will appear on the screen. In the programme Automatic channel scan is started by pressing table you will see the programme numbers and OK button while Automatic channel scan item names assigned to the programmes.
By selecting Yes and pressing the OK button, Select your Country , Language and TXT the existing channel table will be deleted. Language by using “ ” or “ ” and “ ” or “ ” buttons. Press OK or RED button to continue. To After factory settings are loaded, “First Time cancel, press BLUE button.
Film Mode Analogue TV Menu System Films are recorded at a different number Picture Menu of frames per second to normal television programmes. Press “ ” or “ ” button to select Film Mode . Press “ ” or “ ” button to set this feature On or Off.
Balance Sound Menu This setting is used for emphasizing left or right speaker balance. Press “ ” or “ ” button to select Balance. Press “ ” or “ ” button to change the level of the balance. Balance level can be adjusted between -32 and + 32.
Press “ ” or “ ” button to select Effect. Press setting to adopt. Press “ ” or “ ” button to select “ ” or “ ” button to set as On or Off . Default Zoom . You can set Default Zoom to Panoramic , 16:9 , 4:3 or 14:9 by pressing “...
Install Menu in AV Modes Install Menu The following screen appears in the install menu when the TV is in AV modes. Note that limited options will be available. Switch to TV mode for viewing complete version of the Install menu. Program Press “...
cursor action, programme selection is done automatically. Name To change the name of a programme, select the programme and press the RED button. Whenever you press the BLUE button, APS function stops and Program Table appears on The fi rst letter of the selected name will be the screen.
Select V Position item by using “ ” or “ PC Mode Menu System ” button. Use “ ” or “ ” button to adjust the See “Connecting the LCD TV to a PC” section value. for connecting a PC to the TV set. Phase For switching to PC source, press “SOURCE”...
• When the AUTO mode does not function Displaying TV Information correctly due to poor WSS signal quality or Programme Number , Programme Name , when you want to change the ZOOM mode, Sound Indicator and Zoom Mode information is change to another ZOOM mode manually.
Tips Screen Care Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may Subtitle damage the coating layer of the TV screen. This zooms up the wide picture (16:9 aspect For your safety, unplug the mains plug when ratio) with subtitles to the full screen.
Sound You can not hear any sound. Did you perhaps interrupt the sound, pressing the button? Sound is coming from only one of the speakers. Is the balance set to one extreme? See Sound Menu . Remote Control Your TV no longer responds to the remote control.
Appendix A: PC Input Typical Display Modes The display has a maximum resolution of 1920 x 1200 . The following table is an illustration of some of the typical video display modes. Your TV may not support different resolutions. Supported resolution modes are listed below. If you switch your PC to an unsupported mode, a warning OSD will appear on the screen.
Appendix C : Pin Specifi cations SCART connector pin specifi cations Input signal Input signal AUDIO OUT (RIGHT) Not used AUDIO IN (RIGHT) RGB-R GND AUDIO OUT (LEFT/MONO) AUDIO GND RGB-R / S.VHS CHROMINANCE IN RGB-B GND BLANKING SIGNAL AUDIO IN (LEFT/MONO) COMPOSITE VIDEO GND RGB-B IN BLANKING SIGNAL GND...
Specifi cations TV BROADCASTING PAL/SECAM B/G D/K K’ I/I’ L/L’ RECEIVING CHANNELS VHF (BAND I/III) UHF (BAND U) HYPERBAND MHEG-5 ENGINE compliant with ISO/IEC 13522-5 UK engine Profi le 1 Object carousel support compliant with ISO/IEC 135818-6 and UK DTT profi le for UK Frequency range: 474-850 MHz for UK models 170-862 MHz for EU models...
Page 46
Contents Features ............... 46 CD Menu .............. 55 General Properties..........46 Basic Play ............55 About this Manual ..........46 MP3/MPEG File ..........55 Safety Information ......... 46 PAUSE .............. 56 Notes on Discs ............. 47 Stopping Play............ 56 On handling discs ..........47 Rapid Advance (Rapid Reverse) ......
*** DVD-R/RW discs recorded by DVD-Video Features method can be played . Some DVD-R/RW General Properties discs may be incompatible due to laser pick- up and disc design. • DVD / CD / CD-R / CD-RW / MP3 / JPEG / MPEG.
Notes on Discs How to Watch a DVD When placing a disc into the loader, labeled side On handling discs of the disc should be on the front: • To keep the disc clean, handle the disc by its edge. Do not touch the surface. •...
Using Digital Multimedia Connectors • Use SWAP button on the remote control to switch between USB and memory card. • You can connect USB/MC devices to your TV by using USB or MC input of the TV. This feature allows you to display/play fi les stored on a USB device or a MC card. •...
Overview of the Remote Control Standby Image size Sleep timer Numeric buttons Return Cursor up Cursor left Programme up Programme down No function in DVD mode Audio-Language selection Swap / DVD media selection No function in DVD mode Display time / DVD menu Clear Stop No function...
>Highlight an item by USB & MC Modes Playback moving up or down. Switch to DVD source by using the SOURCE or > Play PLAY button on the remote control. > Pause You can connect both USB and MC sources to >...
The screen freezes. Stopping Play Press SKIP/ FRAME ( ) on the remote Press stop ( ) twice (only for videos). control. To stop the play permanently, press STOP ( ) The next frame of the movie is displayed. twice. When the STOP( ) button is pressed for the fi...
• If you wait fi ve seconds without pressing any title, the search box disappears and “ Input key to enter time, selecting scenes by time Invalid” message is displayed on screen. option is cancelled. • If you wait fi ve seconds without pressing any •...
number of times until “Subtitle Off” appears 2X” is displayed on the screen and the on the screen. picture is now larger. By pressing ZOOM key Changing Audio Soundtrack Language It is possible to change the audio language consecutively you can reach “ 3X”, “...
guide menus, and those recorded with various Continue” will appear on the screen to remind languages provide menus for audio and subtitle you if you want to continue the play. To stop language. Although the DVD menus’ contents the play, press the STOP ( ) button again or and operation differ from disc to disc, the you can press PLAY ( ) to continue.
• If “Single remain” is displayed, the remaining (or) ). There are 4 slow motion modes time for the title which is being played will be 1/16, 1/8, 1/4, 1/2. displayed. The speed of slow motion play is displayed on Pressing the INFO key again closes display the screen each time you change it.
Audio CD Track: To return to normal play; Elapsed or Remaining Time can be displayed Press ZOOM again. using DISPLAY key and can be changed using JPEG : INFO key. Press PLAY ( ) to start slide show. During PAUSE slideshow, you may change slide type (effect) by pressing ANGLE button.
TV Type Setup Menu TV Type is only available as ‘PAL’. The TV set Press DISPLAY key on the remote control when also supports NTSC signal; however, the signal the player is not in playback mode. will be converted to PAL when it appears on The setup menu-main page appears.
STEREO: Two channels stereo. Disc does not play PARENTAL (Parental Level) • No disc in the machine. Place a disc into the loader. • Disc incorrectly loaded. Ensure that the DVD disc is in the drawer with the label uppermost. •...
and on again. If this does not work, contact your Title Number supplier or TV-DVD repair technician. Never These numbers are recorded on DVD discs. attempt to repair a defective TV-DVD yourself. When a disc contains two or more movies, these movies are numbered as title 1, title 2, etc.
Supported File Formats for USB & MC Modes Format Remarks File Media Extension Video Audio (Maximum resolution/Bit rate etc.) MPEG Layer MPEG1 .mpg/ .dat/ 1/2/3 .vob MPEG2 MPEG2 Movie XviD/ 3ivx PCM/MP3/ XviD Verson up to: 1.1.2 MPEG4 PCM/MP3/ .avi MS ISO PCM/MP3/ Support SP and ASP...
Product Guarantee This product is guaranteed against manufacturing defects for a period of 1 Year This does not cover the product where the fault is due to misuse, abuse, use in contravention of the instructions, or where the product has been the subject of unauthorised modifi cations or alterations, or has been the subject of commercial use In the event of a problem with the product within the guarantee period please return it to your nearest store...