Auto Clock Set; Manual Clock Set; Tv Aspect (Standard And Wide); Display Mode - Hitachi DV-DS253E Instruction Manual

Auto Clock Set

When Channel auto search is completed the actual
Time and Date are also set automatically. If the time in
the recorder display is not correct, the clock must be
set manually.
1. Select [Clock set] option then press
2. Use / to select [Auto] option then press
ENTER.
Note:
There are cases where the TV station does not send, or
sends wrong date and/or time information and the
recorder sets the incorrect time.
If this happens, we recommend that you set the clock
manually.

Manual Clock Set

1. Select [Clock set] option then press
2. Use / to select [Manual] option then press
ENTER.
3. Enter the necessary information for date and time.
/ (left/right): Moves the cursor to the previous
or next column.
/ (up/down): Changes the setting at the
current cursor position.
4. Press ENTER to confirm your setting, then press
SETUP to exit the Setup menu.

TV Aspect (Standard and Wide)

Selects the aspect ratio of the connected TV (4:3
standard or wide).
• [4:3] Select this when connecting to a 4:3 screen TV.
When you select [4:3], set [Display Mode] below.
• [16:9] Select this when connecting to a wide-screen
TV or TV with a wide mode function.

Display Mode

Selects how to display a wide picture on the screen
when [4:3] is selected in [TV Aspect].
• [Letter Box] Displays a wide picture with bands on the
upper and lower portions of the screen.
.
• [Pan Scan] Automatically displays a wide picture on
the entire screen and cuts off the portions that do not
fit.

AV2 Connection

You can connect a decoder or other device to the
EURO AV2 DECODER socket on the back.
• [Decoder] Select [Decoder] if you connect the
recorder's EURO AV2 DECODER jack to a PAY-TV
or Canal Plus decoder.
• [Others] Select [Others] if you connect the recorder's
EURO AV2 DECODER jack to a VCR or similar
. recording device.

Power Save Mode

You can set up the unit into an economic power save
mode. Nothing is displayed in the display window when
the unit is turned off.
• [OFF] Power Save Mode is not active.
• [ON] Power Save Mode is active.
Notes:
• The encoded television signals (CANAL+ or
PREMIERE) are not decoded in the Power Save
Mode.
• The Power Save Mode is not available in the standby
mode for the timer recording and when power off of
the unit after receiving the encoded television signals
(CANAL+ or PREMIERE).
21