Getting Started; Dab Mode - Hitachi KH 312 Instruction Manual

Design dab & fm rds tabletop radio
Table of Contents

Advertisement

Getting Started

Connect the supplied AC/DC adapter to the DC IN socket and then plug the other end to the
mains socket. Turn the Volume Knob to power the unit on and extend the aerial found on the top
of the DAB radio.
R ADIO RIGHT SIDE VIEW
DC IN socket

DAB Mode

Then your radio will go into DAB mode, or the last selected
m
ode (ie: DAB or FM or AUX). If you want DAB mode, touch
until DAB Mode appears.
8
Installing Batteries
1. Switch off the radio and unplug
it from the mains socket.
2. Remove the battery
compartment cover at the
bottom of the radio.
3. Insert 4 new C-size batteries,
referring to the polarity
markings inside the battery
compartment.
Note: Before installing batteries,
ensure that the radio is
disconnected from the mains
supply. If you are not going to use
the radio for an extended period,
please remove the batteries to
avoid damage. Never mix old and
new batteries.

Advertisement

Table of Contents
loading

Table of Contents