Getting Started; Dab Mode; Autoscan - Hitachi KC320 Instruction Manual

Getting Started

Connect the unit to the power outlet, it will automatically enter the clock mode.

DAB Mode

Touch to enter the DAB mode.
Scanning for DAB Radio Stations
1. For initial use in DAB mode, your radio will now scan
for DAB stations in your area and store them in
memory. A slide bar is displayed on the LCD, indicating
the progress of the scan.
2. Once the scanning is completed, the DAB stations will
be displayed in alphanumeric order. The first station in
the list will be selected.

1. Autoscan

(a) To perform an Autoscan scan, press
select Autoscan and start scanning. A progressing slide
bar is displayed on the LCD until the autoscan finished.
Note: In DAB mode, you may press
<Autoscan>, <Add new stations>, <Autoselect> and
<Manual Tune>.
(b) Once the scanning is completed, the station name list
will be displayed in alphanumeric order.
(c) You may press
then press to confirm.
Note:
a. You can move back to the previous screen at any time by
pressing the button.
b. If no DAB signal is found in your area, it may be
necessary for you to relocate your radio. Alternatively, visit
http://www.ukdigitalradio.com/coverage to check that DAB
coverage is available in your area.
8
or
or to select your desired station,
and to
to browse