Wnm80 Components - Hitachi WNM80 User Manual

Introduction (continued)

WNM80 Components

(4) LAN port
(1) Main unit
(3) Clasp
The WNM80 wireless network module is composed of its main unit (1) and rear cover (2).
(1) Main unit:
Mounts onto the CP-X885, CP-X880 or CP-X870 model LCD projector.
(2) Rear cover:
Remove this cover when mounting the WNM80 module to a projector and then reattach once
the WNM80 module is properly mounted onto the projector.
(3) Clasp:
Use this to secure the WNM80 module in place. Tighten these once the WNM80 module is
properly mounted onto the projector.
(4) LAN port:
The port used to connect to a network hub or directly to a PC using a LAN cable. This
connection can't be accessed when the wireless LAN card is in use. Remove the wireless
LAN card if you wish to use a cable-based LAN connection. (Only one LAN connection at a
time is allowed.)
(5) PCMCIA card slot:
(6) Card eject button:
This is the slot for inserting the PCMCIA compatible wireless LAN card or memory cards.
Insert cards slowly and carefully into this slot. Use this button to remove a card from the card
slot. After pressing this button, slowly remove the card.
(7) Power cable:
Use this cable to connect the module to the projector in order to supply power to the module.
(8) Power port:
Firmly plug the power cable into this port after the module is properly mounted onto the
projector.
(5) PCMCIA card slot
(6) Card eject button
(9) Locking screws
(7) Power cable
(8) Power port
(2) Rear cover