Specifications - Mark Levinson 532 Owner's Manual

Nº532 Power Amplifier
Input & Output Connectors
Control Connectors
Rated Output Power
Frequency Response
Signal-to-Noise Ratio
Input Impedance
Voltage Gain
Input Sensitivity
Output Impedance
Power Requirements
Dimensions
Weight
Operating Environment

Specifications

All specifications are subject to change without notice.
• two balanced XLR inputs
• two unbalanced RCA inputs
• two "Hurricane" loudspeaker outputs with banana-plug sockets
(banana-plug socket not available on the 230 VAC models)
• two Link2 ports
• one Ethernet port
• one 3.5mm mono (tip/sleeve) mini plug trigger input, 3-12Vdc
• one 3.5mm mono (tip/sleeve) mini plug trigger output, 3-12Vdc
• 3-pin IEC standard power connector
20Hz to 20kHz at <0.5% THD, 400W per channel @ 8 Ω,
full output from 2.59Vrms
within 0.1dB from 10Hz to 20kHz
>85dB, reference level: 2.83 Vrms
100 kΩ (balanced); 50 kΩ (unbalanced)
26.8dB
2.83Vrms output at 130mVrms input
<20 mΩ, 20Hz to 20kHz
100V∼, 120V∼, 230V∼, 800W, factory set for destination country
• Height (with feet): 9.55 in (242.57mm)
• Height (without feet): 8.75 in (225.25mm)
• Width: 17.5 in (444.50mm)
• Depth: 21.1 in (535.85mm)
• Net weight: 121.5 lbs (55.22kg)
• Shipping weight: 129.5 lbs (58.86kg)
• Operating temperature: 0
• Storage temperature: –30
• Relative humidity: 95% maximum without condensation
o o o o
to 35 C (32 to 95 F)
o o o o
to 75 C (–22 to 167
27
F)