Maintaining Your Harmony One; Upgrading Your Harmony One Firmware; Testing Your Remote Settings After A Software Upgrade; Upgrading To A New Harmony Remote - Logitech Harmony One User Manual
Advanced universal remote
Hide thumbs
Also See for Harmony One:
- Setup manual (104 pages) ,
- Installation manual (44 pages) ,
- User manual (43 pages)
Table of Contents
Advertisement
Maintaining your Harmony One
Upgrading your Harmony One firmware
Your Harmony One contains internal software, called firmware. The remote's firmware is
similar to your computer's operating system.
Logitech updates the firmware for your remote to ensure you're always getting the most
from your Harmony One. Generally, when you connect your remote to your computer
the Harmony Remote Software updates your remote automatically if new firmware is
available.
However, sometimes you may need to update the firmware manually.
To upgrade your Harmony One firmware:
1.
Remove your Harmony from the charging station.
2.
Connect your Harmony to your computer using the USB cable.
3.
Start the Harmony Remote Software.
Click Downloads.
4.
Click Firmware.
5.
6.
Follow the online instructions.
Testing your remote settings after a software upgrade
After you finish making any changes to your Harmony One's configuration, you should test
the new set up to ensure everything is working the way you expect. This testing process
is the same as the one you did when you set up your Harmony One for the first time. For
more detailed information, see
Upgrading to a new Harmony remote
When you upgrade to a newer model Harmony, you can transfer the configuration from
your old remote to your new remote.
To upgrade to a new model Harmony remote:
From the Harmony Remote Software:
Click Remote Settings.
1.
Click Manage Remotes.
2.
Click Replace.
3.
4.
Follow the online instructions.
Testing your
setup.
7
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Harmony One and is the answer not in the manual?
Questions and answers
changing the battery
To change the battery in a Logitech Harmony One remote:
1. Press the small button on the back to release the battery compartment.
2. Pull the battery cover off.
3. If the old battery is hard to remove, gently pry it up with a small flat-blade screwdriver.
4. Use needle-nose pliers to grip and pull the battery out.
5. Insert the new rechargeable battery.
6. Snap the battery cover back in place.
This answer is automatically generated