Table of Contents
Advertisement
plus
28 GS750
and 6. Adjust, if necessary, for paper thickness or desired
hole size. Reduce plotter speed if pouncing small holes.
POUNCE WHEEL REPLACEMENT
One pounce wheel supplied is installed in the tool holder, and a
spare is included in the tool kit.
To replace the pounce wheel
1. Using the Allen wrench from the Tool Kit, remove the hex
screw that serves as the wheel's axle.
2. Remove the old wheel. Position the new wheel in the holder.
3. Slide hex screw through holder and wheel (as an axle) and
tighten.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the GS750 Plus and is the answer not in the manual?
Questions and answers