Table of Contents
Advertisement
Your Remote Control
S.MODE
MTS
P. MODE
CAPTION
SLEEP
P.SIZE
0
0
MUTE
VOL.
INPUT
GUIDE
INFO
CH.
EXIT
MENU
0
Chapter Introducing the LCD TV
Turns the LCD TV on and off.
MTS
Cycles through the multi-channels TV
sound(MTS) options: SAP/MONO/
STEREO
S.MODE
Selects sound effect options: Surround/
Live/Dance/Techno/Classic/Soft/Rock/
Pop/Off.
P.MODE
Selects picture mode: Vivid/Hi-Bright/
Cinema/Sport/User
P.SIZE
Cycles through Wide mode settings :
NORMAL /FULL/WIDE/ZOOM
CAPTION
Cycles through the Closed Caption:
Anlalog Closed Caption:CC1/CC2/
CC3/CC4/T1/T2/T3/T4/Off
Digital Closed Caption:Service1/
Service2/Service3/Service4/Service5/
Service6/Off
SLEEP
Cycles through the LCD TV sleep timer:
OFF/30/60/90/120 mins
0-
Select and switch to a channel by using
0-9 buttons.
In HDTV mode, use with 0-9 and
buttons to select a digital channels.
JUMP
Returns to previously selected channel.
MUTE
Mutes and restores the audio
VOL.+-
Increases and decreases volume.
CH.+-
Scans up and down the channels
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the ELCP0371 and is the answer not in the manual?
Questions and answers
Elcp0371 will not channel scan for digital channels while attached to an indoor or outdoor antenna
The Element ELCP0371 may not scan for digital channels with an indoor or outdoor antenna due to several possible reasons:
1. Improper Antenna Connection – Ensure the antenna is properly connected to the VHF/UHF IN port on the TV.
2. Incorrect Antenna Type – If using a VHF-only or UHF-only antenna, a signal combiner may be needed for proper reception.
3. Weak Signal Reception – Indoor antennas may not receive strong enough signals, especially if far from broadcast towers.
4. Incorrect TV Input Source – The TV must be set to Antenna (Air) mode instead of Cable mode.
5. Need for a 300/75-ohm Adapter – If using a 300-ohm twin-lead cable, a 300/75-ohm adapter (not included) may be required.
6. Interference or Obstructions – Nearby electronic devices or physical obstacles may block signals.
7. No Digital Tuner – If the TV does not have a built-in digital tuner, an external converter box is required for digital channels.
Check these factors to troubleshoot the issue.
This answer is automatically generated