Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for ViewSat VS2000 ULTRA
Summary of Contents for ViewSat VS2000 ULTRA
-
Page 2: Table Of Contents
Table of Content Table of Contents 1. SAFETY PRECAUTIONS 1.A. ACCESSORIES 2. GENERAL FEATURES 3. HOW TO CONNECT YOUR RECEIVER 4. HARDWARE DESCRIPTION 5. SYSTEM SET-UP 6. MENU STRUCTURE 7. MENU OPERATION 1. INSTALLATION 2. USER SETTING 3. CANNEL ORGANIZATION 4. - Page 3 This device complies with part 15 of the FCC rules. Operation is subject to the following conditions : 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has tested and found to comply with the limits of a Class B digital device, pursuant to part 15 of the FCC Rules.
-
Page 4: Safety Precautions
This receiver has been manufactured to satisfy the Check the following accessories when you open the box. international safety standards. Please read the following recommended safety precautions carefully. : AC 95V~240V 50 / 60 Hz : Locate the receiver indoor. Locate receiver away from potential hazards such as houseplants, lighting, raining and direct sunlight. - Page 5 � Please DO NOT plug in the main power supply cord until you have finished � all the connections. Your receiver should be placed under proper ventilation. Don’ t put in completely enclosed cabinet that will restrict the flow of air, Resulting overheating. The location should be safeguarded from direct sunlight, excess moisture, rough handling or household pets.
- Page 6 Connect the coaxial cable from this terminal to the IF input terminal of your analog receiver. Now by keeping the receiver in standby, you will be able to tune and view analog channels from your analog receiver. This key is used to turn the receiver on and off (stand by). These keys are used to change the channels.
- Page 7 : This port is to connect the coaxial cable from LNB of your Dish. The IF input is provided through this port and the input frequency range is 950�2150MHz. Also the voltage switching 13V and 18V is passed through this port. : To enable the connection of an analog receiver, the receiver is provided with this port.
-
Page 8: Installation
You can automatically detect and save all TV and Radio channels You can automatically search and save all TV and Radio channels of of a satellite as follows : a transponder as follows : ■ Select Menu/Installation/ Channel Scan. ■ Connect the receiver to all peripheral devices. ■... -
Page 9: User Setting
The main menu is classified into several sub menus which will carry out the various operation individually. After installing your dish system and receiver with appropriate connectors, plug in the AC main power and turn on the receiver. Press the MENU key of the RCU. You will see the “Main Menu”... - Page 10 Your receiver includes the preprogrammed information of transponders contained in various Please go to Antenna Setup and select USALS satellites. from motor. You can update the transponder list preprogrammed for a satellite by adding a new transponder to it or Press the “OK”...
- Page 11 You can see the progressive status of channel searching. If you cannot find the desired transponder from the transponder list, you can add it by inputting Check the signal strength. Press “OK” key to appropriate parameter values for a new transponder using the “F1” key. When you want to start the scan procedure.You can see the change the parameter of an existent transponder, select the parameter using the “F1”...
- Page 12 You can change the time of your receiver and also This function prevents children or unauthorized switch on/off the timer function in this menu. persons from watching programs. Also you can change PIN(Personal Identification Select “Time Setting” item in the “ User Setting” menu Number) code.
- Page 13 Press the “OK” key to confirm your selection. : You can choose either 4:3 or 16:9 according to the TV type. Also, you can use the “ ” key to select either TV channel list or Radio channel list. : You can select the channel mode when channel is changed. Once the channel is locked, every time you try to watch the program, you will be asked to enter PIN : You can select the transparency of the menu.
- Page 14 You can choose TV channel list or Radio channel list in an alternative way by pressing the “ ” You can edit the favorite channel list, such as add/delete a channel or move its position, which key on the RCU. facilitates you to easily find your favorite channel from the favorite channel list.
-
Page 15: System Information
Select the firmware upgade file and press OK. Distributor supports you useful information and new software for the receiver. This menu displays the information of S/W version. You can upgrade the software of this receiver through serial port or USB port when the new software is released. -
Page 16: Games
Press “GUIDE” key, and the following screen will be This menu helps you play game called Tetris. In this displayed. It will give the titles of the current and next game you can choose level from 1 or 9. Once you programmes on different channels. - Page 17 You can adjust the color seting to take the enhenced TV screen. Press “COLOR (F2 , TEXT)” key then below screen will display. On the live TV screen or paused TV screen, you can magnify some region of TV screen. Press “F4”...
- Page 18 About the Receiver : SMPS Does not display LED on the - Connect the power cord to the power outlet : AC 95V~240V 50Hz / 60Hz front panel or the receiver has no power. properly. : 250V/T2A - Check if the receiver is in standby mode. - Check if the video output port is firmly No pictures on the screen connected to the TV.
-
Page 19: Brand List For Tv
: MPEG-1 ISO/IEC 11172-3 Layer I & II : Mono, Dual, Stereo, Joint Stereo : 32, 44.1, 48 KHz : 2 RCA Cinch : 1 RCA Cinch : 1 S/PDIF (Optical) : 1 S-VIDEO : 3 RCA Cinch : CH3~4 : NTSC : “F”...
Need help?
Do you have a question about the VS2000 ULTRA and is the answer not in the manual?
Questions and answers