Ignition Switch Positions - Vauxhall Zafira Owner's Manual

2009
Hide thumbs Also See for Zafira:
Table of Contents

Advertisement

126
Driving and operating

Ignition switch positions

0 = Ignition off
1 = Steering wheel lock released,
ignition off
2 = Ignition on, for diesel engine:
preheating
3 = Starting
Starting the engine
Starting engine with ignition
switch
Operate clutch and brake, automatic
transmission in P or N, do not
accelerate; for diesel engines, turn
the key to position 2 for preheating
until control indicator ! goes out;
turn key briefly to position 3 and
release key when engine is running.
Before restarting or to switch off the
engine, turn key back to 0.
Starting engine with the
Start/Stop button
The electronic key must be inside the
vehicle. Operate clutch and brake,
automatic transmission in P or N, do
not accelerate, for diesel engines,
press the button briefly to start
preheating, move the steering wheel
slightly to release the steering wheel
lock, wait until control indicator !
goes out and then press button for
1 second and release when the
engine is running.
To repeat the starting procedure or to
switch off the engine, press the button
again.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Zafira and is the answer not in the manual?

Questions and answers

Phil Thompson
February 5, 2025

Seat belt not retracting

1 comments:
Mr. Anderson
February 10, 2025

The seat belt in a Vauxhall Zafira may not be retracting because it is not in the correct orientation. If the seat belt mechanism is upside down or tilted incorrectly, it may prevent the belt from releasing properly. Additionally, an orange pin mechanism is designed to stop the seat belt from fully retracting when the seats are flipped. If the seat is not positioned correctly, this pin may be holding the belt, preventing it from functioning normally.

This answer is automatically generated

This manual is also suitable for:

2010 zafira

Table of Contents

Save PDF