The Control Panel in Mac OS
Open the Control Panel folder using the corresponding Aureon symbol. You should now see
the following window.
The individual faders:
SoundSystem Aureon 7.1 FireWire (English)
Input:
The Input fader adjusts the volume of the individual inputs such as
Line, Phone, Mic or S/PDIF (S/PDIF is enabled only if a signal is pre-
sent).
Monitor:
This fader changes the currently selected input signal at the output.
Thus you can increase or decrease the volume of the original input
signal at the output.
Speaker:
In this section, you can control the volume of the outputs (Front, Rear,
Surround, Center).
Master:
The Master fader adjusts the master playback volume. This controller
is switched parallel to the master encoder on the device itself. If you
rotate the Master fader on the box, the volume is adjusted here also.
9
Need help?
Do you have a question about the Aureon 7.1 FireWire and is the answer not in the manual?
Questions and answers