Do you have a question about the FireOne and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for Tascam FireOne
Page 1
» D00963220B FireOne FireWire Audio/MIDI Control OWNER'S MANUAL...
Page 2
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 Trade Name : TASCAM of the FCC Rules. These limits are designed to provide Responsible party : TEAC AMERICA, INC.
12 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. TASCAM FireOne...
IMPORTANT SAFETY INSTRUCTIONS Overview ing and editing environment. The FireOne’s high-definition Thank you for choosing the TASCAM FireOne. With an inte- recording capabilities (up to 192 kHz, 24-bit) are supported grated design that includes professional-quality mic preampli- fiers, high-resolution analog-to-digital conversion, MIDI, and...
FireOne is supported under Windows XP Service Pack 2. No support for earlier versions such as Windows 98 or Windows ME is offered. FireOne is supported by Macintosh OS X, version 10.4 and later. Earlier versions of Macintosh operating systems are not supported. TASCAM FireOne...
Adobe Web number of different DAW programs. This Application Guide site at www.adobe.com. is available online in PDF format on the TASCAM Web site. Updates Since software applications and operating systems often evolve and develop after their initial release, we suggest you check the TASCAM site (www.tascam.com) regularly for...
A/D converter can be optimized. Careful optimization of the signal levels will maximize the signal-to-noise ratio of the recorded signal, while prevent- ing distortion due to overload. The signal level indicators TASCAM FireOne...
Page 9
GAIN 2. Adjust the input signals with the input controls such that the loudest peaks in the signals will only occasionally light the amber (-2dB) indi- cators. TASCAM FireOne...
5-pin connectors allow MIDI IN MIDI OUT Standard you to hook up external MIDI controllers, tone genera- tors, etc. The MIDI messages are not processed by the FireOne, but passed to application software as with any other external MIDI port. TASCAM FireOne...
NOTE The first time you install FireOne, you will need to install the “TASCAM Null Driver” and then the standard Fire- One driver. If you need to reinstall the driver at a later time, you will not need to install the Null Driver again, and you can click OK to skip this step at the appropriate point.
FireOne includes a set of LEDs arranged in a ring under MIDI Clock Flash • the jog/shuttle wheel. The Display Mode setting offers the Jog Slow Rotate • following possibilities: • Jog Track Always Off • Always On • Breathe • • Metronome MIDI Clock Rotate • TASCAM FireOne...
Input B being heard in the right. Enabling “Input Mon Mono” causes the direct input monitor to be mono, with Input A and B being heard in both the left and right channels equally. TASCAM FireOne...
Connect the output of the FireOne to your speakers (via an ) jacks (XLR). If MIC/LINE IN Connect your mics to the you are using a condenser mic that requires phantom power, turn on the phantom power. TASCAM FireOne...
Connect the analog audio output of these devices to the MIC/ ) jacks (1/4” phone jack). If you use the , set the LINE IN switch to REAR/FRONT REAR Keyboard/ Drum machine/ sound module/ cassette deck/ MD/CD etc. TASCAM FireOne...
Alternatively, you can connect it via an audio amplifier that directly to the FireOne. has PHONO inputs. You must connect a phono preamplifier between your analog record player and the FireOne. PHONO amp or amp with PHONO inputs Analog record player TASCAM FireOne...
You can use the connectors to transmit and receive MTC (MIDI Time Code). This allows the MTC- compatible DAW (Digital Audio Workstation) computer application to synchronize with your MIDI equipment. FireWire Computer MIDI OUT MIDI IN Sequencer/ drum machine/etc. TASCAM FireOne...
FireOne is set up as a control surface; however, no buttons operate FireOne control panel. This will be Native in most cases (exception: Pro the DAW software Tools). • Review the application-specific instructions for your DAW on the CD- ROM or TASCAM web site. TASCAM FireOne...
• [Windows] Adjust the latency setting in the FireOne control panel to provide more buffering and prevent overruns. The audio has clicks and pops • [Macintosh] Adjust the latency (audio buffer size) setting in your audio application, if it has one. TASCAM FireOne...
5 pin DIN connector Format MIDI GUITAR input Connector 1/4” inch Phone jack (Tip: HOT, Sleeve: GND) Input impedance Ø Input level -61 dBv (Trim max) to -8 dBv (Trim min) Headroom 16 dB Maximum Gain 53 dB TASCAM FireOne...
Power consumption 4 W (U.S.A.>/Canada) 4 W (U.K./Europe) Dimensions (w x h x d) 260.7 x 168.3 x 54.0 mm (102.64” x 66.26” x 21.26”) Weight 1.2 kg (2.65 lb) Dimensional drawing 54.0 mm (21.26") 260.7 mm (102.64") TASCAM FireOne...
Need help?
Do you have a question about the FireOne and is the answer not in the manual?
Questions and answers