Two-Knife Trim; Trim Ejecting - Canon Two-Knife Booklet Trimmer-A1 User Manual

Conveyor section
Main parts
Main parts
A
B
C
D
E
•
Remove or install the delivery tray, on page 22
•
Two-knife trim section, on page 11
•
Trim ejecting section, on page 15
14 Chapter 2 - Parts and their functions
#
Part
Handle (TE)
Delivery transport
rollers
Booklet detect sensor
Transport belts
Delivery tray
Function
Grip the handle and lift the roller unit when you
remove the booklets from the conveyor.
The delivery transport rollers hold the finished
booklets. The position of the rollers is set automat-
ically to match the booklet size.
The sensor detects when the conveyor is full of
stacked booklets.
The transport belts move the booklets after the
booklets were ejected.
The delivery tray holds the stacked booklets. The
delivery tray can be removed.
Note:
When the delivery tray is removed, the
booklet detection sensor cannot detect
that the conveyor is full. Continuous op-
eration is possible.