Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Zanussi ZWQ 5100
Summary of Contents for Zanussi ZWQ 5100
- Page 1 User manual Washing machine ZWQ 5100...
-
Page 2: Product View
Product description 1. The control panel 2. Lid handle 3. Adjustable levelling feet The control panel 1. Programme selector 4. Lights of cycle progress 2. Temperature selector 5. "Start/Pause" pushbutton 3. Pushbuttons and their functions 6. "Delay start" pushbutton Dispenser box Prewash Wash Softener (do not fill above the MAX symbol... -
Page 3: Safety Information
Safety Information Please read these points carefully before installing and • The manufacturer cannot be held responsible for any using your appliance. Keep this user manual with your damage resulting from incorrect installation. appliance. Precautions to be taken against frost General safety If your appliance is exposed to temperatures below 0°C, •... -
Page 4: Daily Use
How to run a wash cycle? Using for the first time • Remove the polystyrene insert and all other items in- side the drum. • Ensure the electrical and water connections com- • Run an initial wash cycle at 90°C, without any washing ply with the installation instructions. -
Page 5: Programmes Table
• To cancel the delay start and start the cycle immedi- Modifying the programme in progress ately, press “Start/Pause” and then “Delay start”. Press Before making any changes to the current programme, “Start/Pause” to start the cycle. you need to pause the washing machine by pressing the “Start/Pause”... -
Page 6: Descaling The Appliance
Programme / Type of washing Load/Time Possible options Jeans (40°) : For washing denim clothes. The Rinse 3,0 kg Rinse hold, Prewash, Delay start plus option is activated. 130-140 min Sport (40°) : For dirty outside sport clothes. The 2,5 kg Rinse hold, Rinse plus, Delay start Prewash option is activated. -
Page 7: Troubleshooting
Water inlet filters To clean, proceed as follows : Operating Problems Numerous checks were carried out on your appliance be- function, please refer to the sections below before con- fore it left the factory. However, should you notice a mal- tacting the after-sales service. -
Page 8: Detergents And Additives
Problems Causes The appliance vibrates, is • all packaging have not been removed from the appliance (see installation section), noisy: • the appliance isn’t level and is unbalanced, • the appliance is too close to the wall or furniture, • washing is unevenly distributed in the drum, the load is too small, •... -
Page 9: Technical Specifications
Technical Specifications DIMENSIONS Height 850 mm Width 400 mm Depth 600 mm LINE VOLTAGE /FREQUENCY 230 V / 50 Hz POWER CONSUMPTION 2300 W WATER PRESSURE Minimum 0,05 MPa (0,5 bar) Maximum 0,8 MPa (8 bar) Connection to water supply Type 20/27 Installation Remove all protective packaging for transit before using... - Page 10 Drainage or multi-plug adaptor. Ensure that the plug is earthed and that it is in accordance with current regulations. Fit the U-piece on the drain- age hose. Place everything Positioning in a drainage point (or in a Position the appliance on a flat and hard surface in a ven- sink) at a height of between tilated location.
- Page 12 www.zanussi.com...