Upgrading From Version 1.0 - Canon VK-16 User Manual

Installation procedures
Tip
In either dialog, click 'OK' to return to the installation steps.
If the Storage Server is installed, it will be automatically started
after installation.
Note

Upgrading from Version 1.0

When installing over an earlier version, VK-64 will attempt to use settings from your
previous installation. It is important to verify your settings after installation.
You cannot use v1.1 Viewer with a v1.0 Storage Server, nor can you
use a v1.0 Viewer with a v1.1 Storage Server. When installing, make
Note
sure you install components that have the same version number.
20
4
Click the 'Help' button to obtain details on the type of
installation. The type is indicated by the icon next to the
application to be installed. You can set a custom install here.
Click the 'Space' button to view the amount of hard disk space
required in order to install VK-64. A list of drives is shown.
5
Depending on your License Key, you will
be presented with one or both of the
following applications shown below:
Viewer
Storage Server
It is recommended to keep the Install To:
path as is. Click the Change... button to
choose another installation path if necessary.
Click Next to continue (or view Tip below).
When you click Next, installation will proceed
and a progress bar will be displayed.
When the InstallShield Wizard Completed
screen displays, click the Finish button.
Installation is now finished.
In future, if you need to check your product
type, refer to the 'About' box of the Storage
Server or Viewer.