Canon VB150 User Manual page 10

Operation of the Motion Detection Function Using a Schedule
7
● Once the red rectangle in the viewer reliably captures the
intruder, check that the peak display in the detection
indicator gives a "Motion detected" result. If there is no
"Motion detected", adjust the sensitivity, area ratio and
duration settings.
● Record the 4 seconds of video that precedes the "Motion
detected" event.
● Record 8 seconds of video after the "Motion detected"
event.
● Between "Motion detected" events, record pictures at 10
second intervals.
● Set the parameters so that a signal is sent to the warning
device at the same time as the "Motion detected" event
and discontinued 10 seconds later.