Hide thumbs Also See for ZDI6053:

Advertisement

User
manual
Dishwasher
ZDI 6053

Advertisement

Table of Contents
loading

Summary of Contents for Zanussi ZDI6053

  • Page 1 User manual Dishwasher ZDI 6053...
  • Page 2: Table Of Contents

    Content Safety information - - - - - - - - - - - - - - - - - - -3 Control panel and functions - - - - - - - - - - - -4 Programme table - - - - - - - - - - - - - - - - - - -6 Before the first use - - - - - - - - - - - - - - - - - -6 Setting the water softener - - - - - - - - - - - - -7 Filling with dishwasher salt - - - - - - - - - - - -8...
  • Page 3: Safety Information

    Safety information In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents. it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features.
  • Page 4: Control Panel And Functions

    Never use the dishwasher if the electrical All sides of the dishwasher must never be ● ● supply cable and water hoses are damaged; drilled to prevent damage to hydraulic and or if the control panel, work top or plinth area electric components.
  • Page 5 when in this position, the machine is switched off (On/Off ● Programme selector dial indicator light off), On/Off switch when the marker on the dial corresponds with a programme, ● the machine is switched on and a programme is selected (On/off indicator light on).
  • Page 6: Programme Table

    Programme table Programme Cycle description INTENSIVE 70°C Heavy soil. Prewash - Main wash Crockery, cutlery, 2 intermediate rinses - pots and pans Final rinse - Dry NORMAL 65°C Normal soil. Prewash - Main wash Crockery and cutlery 2 intermediate rinses - Final rinse - Dry QUICK 30 MIN.
  • Page 7: Setting The Water Softener

    Setting the water softener The dishwasher is equipped with a water IMPORTANT! softener designed to remove minerals and salts The water softener must be set in both ways: from the water supply, which would have a manually and electronically. detrimental or adverse effect on the operation of the appliance.
  • Page 8: Filling With Dishwasher Salt

    Setting the water softener electronically (see table) The water softener is factory set at position 5. The dishwasher must be switched off Release the button. The END indicator light will flash. The number of flashes corresponds to current level set. The END indicator light might flash 5 times, for example.
  • Page 9: Filling With Rinse Aid

    IMPORTANT! Immediately start a complete programme. IMPORTANT! The salt container will require topping up periodically. Remove any trace of Replace the cap tightly salt. turning it clockwise until it stops with a click. Filling with rinse aid Open the lid. Fill up with rinse aid.
  • Page 10: Adjusting The Dosage Of Rinse Aid

    Adjusting the dosage of rinse aid Increase the dose if there are drops of water or Reduce the dose if there are whitish streaks lime spots on the dishes after washing. on the dishes or a bluish film on glassware or knife blades.
  • Page 11: Adjusting The Height Of The Upper Basket

    Load cutlery. Place knives and other Load the lower basket. For best results we items of cutlery with Arrange serving dishes and large lids around the recommend you to use sharp points or edges edge of the basket. the cutlery grid provided with their handles facing (if the size and upwards.
  • Page 12: Filling With Detergent

    IMPORTANT! When the basket is in the higher position you will not be able to use the cup racks. Move the front runner Refit the basket in stops (A) of the upper the higher position basket outwards and and replace the stops slide the basket out.
  • Page 13: Unloading The Dishwasher

    Unloading the dishwasher IMPORTANT! Empty the lower basket first and then the ● upper one; this will avoid water dripping from Open the dishwasher’s door, leave it ajar and the upper basket onto the dishes in the lower wait a few minutes before removing the one.
  • Page 14: Environmental Concerns

    External cleaning Frost precautions Clean the external surfaces of the machine and Avoid placing the machine in a location where control panel with a damp soft cloth. If the temperature is below 0°C. If this is necessary use only neutral detergents. Never unavoidable, empty the machine, close the use abrasive products, scouring pads or appliance door, disconnect the water inlet pipe...
  • Page 15: Something Not Working

    Something not working IMPORTANT! The dishwasher will not start or stops during operation. Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the indications described in the chart, without calling out an engineer. Switch off the dishwasher, open the door and carry out the following suggested corrective actions.
  • Page 16 The wash results are not satisfactory The wrong washing programme has been selected. ● The dishes are not clean The dishes were arranged in such a way as to stop water reaching all parts ● of the surface. The baskets must not be overloaded. The spray arm do not rotate freely due to wrong arrangement of the load.
  • Page 17: Technical Data

    Technical data Dimensions Width 596 cm Height 81,8 - 87,8 cm Depth. 57,5 cm Electrical connection Information on the electrical connection is given on the rating plate on Voltage - Overall power - Fuse the inner edge of the dishwasher’s door. Water supply pressure Minimum 0,05 MPa...
  • Page 18: Hints For Test Institutes

    Hints for test institutes Testing in accordance with EN 60704 must be Test in accordance with EN 50242 must be carried out with appliance fully loaded and carried out when the salt container and rinse using the test programme (see "Consumption aid dispenser have been filled with salt and values").
  • Page 19: Drain Hose

    CAUTION! If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose. Drain hose Inlet hose Connect the inlet hose to a water tap with an - Connect drain hose to the sink.
  • Page 20: Fitting Under A Counter

    Levelling WARNING! Good levelling is essential for correct closure Multi-way plugs, connectors and ● and sealing of the door. extension cables must not be used. This could constitute a fire hazard through When the appliance is correctly levelled, the door will not catch on either side of the cabinet. overheating.
  • Page 21: Guarantee/Customer Service

    Standard guarantee conditions • Appliances found to be in use within a commercial environment, plus those which We, Zanussi-Electrolux , undertake that if are subject to rental agreements. within 12 months of the date of the purchase this Zanussi-Electrolux appliance or any part •...
  • Page 22: European Guarantee

    Customer Care For general enquiries concerning your Electrolux appliance, or for further information on Electrolux products please contact our Customer Care Department by letter or telephone at the address below or visit our website at www.electrolux.co.uk Customer Care Department Electrolux Major Appliances Addington Way Luton Bedfordshire, LU4 9QQ Tel: 08705 727 727 (*) (*) Calls may be recorded for training...
  • Page 23 Ireland +353 1 40 90 753 Long Mile Road Dublin 12 Italia +39 (0) 434 558500 C.so Lino Zanussi, 26 - 33080 Porcia (PN) Latvija +37 17 84 59 34 Kr. Barona iela 130/2, LV-1012, Riga Lietuva +370 5 27 80 609...
  • Page 24 www.electrolux.com 156998 71/0 12/06 Subject to change without notice...

Table of Contents