Printing To Clients In Masked Networks Despite Nat - HP Bc1500 - BladeSystem - Blade PC Introduction Manual

Printing to clients in masked networks despite NAT

If the .print Clients depicted in Illus. 4 are in masked networks
either be sent via RDP , or the .print Connection Service is installed on the server for
sending print data via TCP/IP . The latter case is usually only necessary if print servers
are used on the client side (Illus. 5). The .print Connection Service only needs to be
installed on a single server. All print data is then sent from .print Engine to the .print
Connection Service instead of to .print Clients. The .print Clients independently
establish a connection to the .print Connection Service and receive their print data
through this connection.
The .print Connection Service is installed on the server but is licensed per .print
Client.
Illus. 5
HP blade PCs
Illus. 5 Printing with a dedicated print server on the server side and a client side print
server in a masked network (NAT)
1 Networks in which routers mask the IP addresses with network address translation (NAT)
White Paper
CCI printing challenges
1
, print data must
9