Page 1
Drawing No. :- TPC161 Issue :- 2 Date :- 23/06/03 EBAC MODEL BD-150 (1024500) INDUSTRIAL DEHUMIDIFIER OWNER’S MANUAL BD-150 OWNERS MANUAL Page 1 of 12...
Page 2
Drawing No. :- TPC161 Issue :- 2 Date :- 23/06/03 INTRODUCTION Designed for a wide range of applications, the BD-150 dehumidifier is a super high capacity industrial unit which provides fast and efficient drying. The BD-150 has a number of special features: •...
Drawing No. :- TPC161 Issue :- 2 Date :- 23/06/03 OPERATION The following procedures should be followed to test the BD-150 for correct operation: After unpacking, examine all external features to confirm damage-free shipment. Report all defects and damage at once. Connect the power cable to a grounded 15 Amp electrical outlet.
Page 5
Drawing No. :- TPC161 Issue :- 2 Date :- 23/06/03 ROUTINE MAINTENANCE WARNING: ENSURE THAT THE POWER CORD TO THE MACHINE HAS BEEN DISCONNECTED BEFORE CARRYING OUT ROUTINE MAINTENANCE. To ensure continued full efficiency of the dehumidifier, maintenance procedures should be performed as follows: Replace or clean the inlet air grille as required.
Page 6
Drawing No. :- TPC161 Issue :- 2 Date :- 23/06/03 REPAIRS Should an electrical component fail, consult the Factory Service Center to obtain the proper replacement part. If refrigerant gas is lost from the machine, it will be necessary to use a refrigeration technician to correct the fault.
Our products carry a one-year unconditional warranty against any defects in workmanship or material. This warranty will cover all parts and labor required to repair your Ebac product. This warranty is invalid if the unit has been abused, damaged, whether intentional or accidental, or if any modifications have been made to the unit.
Need help?
Do you have a question about the BD-150 and is the answer not in the manual?
Questions and answers