Advertisement
Quick Links
Download this manual
See also:
User Manual
IMPORTANT!
This Guide refers to the
following Products:
F1DA104T
PS/2 & USB
F1DA108T
PS/2 & USB
F1DA116T
PS/2 & USB
TSG-UK-2-001
TSG-UK-1-001
Self Help Guide
Self Help Guide
®
®
Pro 2 KVM Firmware Update Instructions
Please read the following carefully;
Synopsis:
This guide will assist you in updating the firmware
of your Belkin OmniView Pro 2 KVM Switch.
Please be advised that firmware updates tend to
be to resolve specific issues and if there is any
doubt if the firmware will resolve your issue you
should check with Technical Support.
Requirements:
To perform the Firmware Upgrade successfully
you will need the following equipment;
• Pro 2 KVM
• 12 V DC 1A KVM Power Supply (supplied)
• RJ45-DB25 Flash Update Cable (supplied)
• PC with Windows 2000 or XP and Parallel Port
• Firmware Update File
• NTPDA Update
You will also need to ensure that any Firewall or
Anti-Virus Software is disabled on the Computer
you will be using to upgrade the Firmware from.
|
|
www.belkin.com
www.belkin.com
|
|
Page 1 of 4
Page 1 of 1
Advertisement
Related Manuals for Belkin F1DA104T
Summary of Contents for Belkin F1DA104T
- Page 1 Products: Synopsis: This guide will assist you in updating the firmware of your Belkin OmniView Pro 2 KVM Switch. Please be advised that firmware updates tend to be to resolve specific issues and if there is any doubt if the firmware will resolve your issue you F1DA104T should check with Technical Support.
- Page 2 The same Firmware is flashed twice in effect. MOUSE | #2 KEYBOARD | #2 For firmware specifically For firmware specifically designed resolve designed resolve Mouse related Issues. Keyboard related Issues. F1DA116T Only F1DA116T Only TSG-UK-2-001 TSG-UK-1-001 www.belkin.com www.belkin.com Page 2 of 4 Page 1 of 1...
- Page 3 To resolve this click ‘OK’ and ‘OK’ again. Unplug Power from the KVM, then unplug the Flash Update Cable. Wait 10 seconds. Now plug the Flash Update Cable in first, followed by the Power Cable. Repeat Step 4. TSG-UK-2-001 TSG-UK-1-001 www.belkin.com www.belkin.com Page 3 of 4 Page 1 of 1...
- Page 4 Firmware has been in some way corrupted. The unit should be re- flashed using an original Firmware on the same Dip-Switch setting as was last used. TSG-UK-2-001 TSG-UK-1-001 www.belkin.com www.belkin.com Page 4 of 4 Page 1 of 1...
Need help?
Do you have a question about the F1DA104T and is the answer not in the manual?
Questions and answers