Printing Lightscribe Label - Nero 9 Manual

18

Printing LightScribe Label

If you have a LightScribe recorder connected, you can also print the label side of a Light-
Scribe CD/DVD with Nero CoverDesigner. The label side of the disc has a special color or
thermal layer which is heated by the laser in the recorder so that pictures and text are prin-
ted.
To print a LightScribe label, proceed as follows:
1.
Create a new document with the LightScribe document type.

The document contains a Disk 1 tab with the cover element for the disc label.
2.
Design the disc label as desired.
3.
Click the

The LightScribe Print Properties window is opened.
4.
Set the desired print options.
5.
Insert a recordable LightScribe disc into the LightScribe recorder with the label side facing
down.
6.
Click the Print button.

The printing process begins. You can monitor the process status with the progress bar.
As soon as the printing is finished, the Nero – LightScribe window is opened and dis-
plays a message about the result of the printing process.
7.
Click the OK button.

You have successfully created and printed a custom LightScribe label.
This function is only available in the full version. You can always upgrade your
Essentials version at www.nero.com
This function is only available in recorders that support LightScribe technology.
icon on the toolbar.
Nero CoverDesigner
Printing LightScribe Label
to get the full version with all the functions.
65