Miele W 211 Operating Manual page 40

Check drain
Check inlet
Excess detergent Excessive foam
Main wash
Anti-crease/Finish
A To switch off the fault indicator: turn the washing machine off with the
I-On/0-Off button and turn the programme selector to Finish .
40
The drain outlet is
restricted.
The water inlet is
restricted.
The filter in the
water inlet hose is
dirty
has built up during
washing.
There is a fault.
The position of the programme selector was altered
after the start of the programme. Turn the programme
selector back to the programme previously chosen.
Clean the fluff filter and the drain
pump as described in "Problem
solving guide – Opening the lid in
the event of a blocked water outlet
and/or a power failure".
Check whether
– the stopcock is opened wide
enough.
– the inlet hose is kinked.
Clean the filter.
Use less detergent next time and
follow the manufacturer's
instructions on dosage given on
the packaging.
Start the programme again.
If the fault indicator occurs again,
contact the Service Department.
A