The Wash Programme Stops And A Fault Indicator Light Comes On - Miele W 460 WPS Operating Instructions Manual

Check drain
Check inlet
Check inlet
Check drain
Soak/Pre-wash
Rinses
A To switch off the fault indicator: switch the washing machine off with the
I-ON/0-OFF button and turn the programme selector to Finish .
The water outlet is
blocked.
The drain hose has
been fixed too high.
The water inlet is
blocked.
The Waterproof
system has reacted.
There is a fault.
Clean the fluff filter and the
drain pump as described in
"Problem solving guide -
Opening the door in the event
of a blocked drain outlet
and/or power failure".
The maximum drain height is
1 m.
Open the stopcock.
Call the Service Department.
Start the programme again.
If the fault indicator occurs
again, contact the Service
Department.
A
39