Introduction
Symbols
®
Registered trademarks
:
®
®
ESP
and PRE-SAFE
are registered trade-
marks of DaimlerChrysler.
The following symbols are found in this
Operator's Manual:
*
Optional equipment is identified
with an asterisk. Since standard
equipment varies between models,
the descriptions and illustrations in
this manual may differ slightly from
the actual equipment of your vehi-
cle.
16
Warning!
Warning notices draw your attention to haz-
ards that may endanger your health or life,
or the health or life of others.
!
Highlights hazards that may result in
damage to your vehicle.
i
Helpful hints or further information you
may find useful.
This symbol points to instructions for
G
you to follow.
A number of these symbols appearing
in succession indicates a multiple-step
procedure.
Page
This symbol tells you where to
look for further information on a
topic.
This continuation symbol marks
an interrupted procedure which
will be continued on the next
page.
->
In the glossary of technical
terms, this symbol is used to in-
dicate cross-references to term
definitions.
Display
Words appearing in the multi-
function display are printed in
the type shown here.
Need help?
Do you have a question about the ML350 and is the answer not in the manual?
Questions and answers
when excelerating my rpm are revieving at an unusal high rate
Unusually high RPMs when accelerating in a Mercedes-Benz ML350 could be caused by several factors, including transmission issues, a slipping clutch (for models with manual mode), or engine performance problems. If the transmission is not shifting properly, it may hold lower gears longer, causing higher RPMs. A faulty torque converter or low transmission fluid can also contribute. Additionally, engine hesitation or power loss, as mentioned in the discussion about the ML350 BlueTEC 4Matic, could prevent the engine from efficiently delivering power, leading to higher RPMs under acceleration.
This answer is automatically generated
How to active terminal 15 is off in my 2005 ml350 benz