Trying The Camera Out - Canon PowerShot SX280 HS User Manual

Trying the Camera Out

Follow these instructions to turn the camera on, shoot still images or
movies, and then view them.
Shooting (Smart Auto)
For fully automatic selection of the optimal settings for specific scenes,
simply let the camera determine the subject and shooting conditions.
1
Turn the camera on.
z z Press the power button.
X X The startup screen is displayed.
2
Enter [
z z Set the mode dial to [
z z Aim the camera at the subject. The
camera will make a slight clicking noise
as it determines the scene.
X X Icons representing the scene and image
stabilization mode are displayed in the
upper left of the screen.
X X Frames displayed around any detected
subjects indicate that they are in focus.
3
Compose the shot.
z z To zoom in and enlarge the subject, move
the zoom lever toward <i> (telephoto),
and to zoom away from the subject, move
it toward <j> (wide angle).
Still Images Movies
] mode.
].
4
Shoot.
Shooting Still Images
Focus.
z z Press the shutter button lightly, halfway
down. The camera beeps twice after
focusing, and AF frames are displayed to
indicate image areas in focus.
X X The flash automatically rises in low-light
conditions.
Shoot.
z z Press the shutter button all the way
down.
X X As the camera shoots, a shutter sound is
played, and in low-light conditions when
the flash is up, it fires automatically.
z z Keep the camera still until the shutter
sound ends.
X X Your shot is only displayed until the
camera is ready to shoot again.
Cover
Preliminary Notes
and Legal Information
Contents: Basic
Operations
Basic Guide
Advanced Guide
1
Camera Basics
2
Using GPS
Function
3
Auto Mode/
Hybrid Auto Mode
4
Other Shooting
Modes
5
P Mode
6
Tv, Av, and M
Mode
7
Playback Mode
8
Wi-Fi Functions
9
Setting Menu
10
Accessories
11
Appendix
Index
18