Left And Right Sides - Panasonic AG-MSU10 Operating Instructions Manual

Left and Right Sides

16 17 16 17
DEVICE DEVICE
HOST HOST
16.
USB 2.0 DEVICE connector (Type Mini-B)
Connect personal computers and other de-
vices for use in the USB device mode.
 For details, refer to "Using the Unit as a USB
Device" (page 37).
17.
USB 2.0 HOST connector (Type A)
Enables connection of a variety of storage
devices using the unit as a USB host.
For example, hard disks that support USB 2.0.
 For details, refer to "Selecting Storage De-
vice" (page 25).
18.
eSATA DEVICE connector
The eSATA connector on the interface box
allows you to connect a personal computer or
other device.
 For details, refer to "Using the unit as an
eSATA device" (page 37).
19.
eSATA HOST connector
Enables connection of a hard disk drive or
solid state drive with an eSATA connector us-
ing the unit as host device.
 For details, refer to "Selecting Storage De-
vice" (page 25).
20.
Security lock slot
Used for attaching security cables. For details
on connection, refer to the instruction manual
supplied with the cable. Security locks and
security cables help prevent theft. However, in
the event that theft does occur, Panasonic is
not liable for any resulting damages.
1
 NOTE:
• It may not be possible to connect an eSATA storage
device that does not support the LINUX operating system.
• Some eSATA storage devices may prolong the startup
time of the unit.
• This unit supports USB bus power (5 V, 0.5 A) but some
storage devices may have difficulties starting up using
USB bus power. Should this happen, provide the storage
device with a separate power supply.
• This unit does not support storage devices that are 2 TB
(2,048 GB) or larger.
• Some storage devices and cables may not operate nor-
mally.
• Use a storage device with sufficient space for copying.
• Do not connect a storage device to hubs or other connec-
tions that involve multiple units even when it is not pow-
ered.
• During formatting and copying, do not disconnect cables,
do not remove a P2 card and do not power off this unit
and the storage device. Otherwise this unit and the stor-
age device must be rebooted. The P2 card may have
become damaged.
• A storage device is a high-precision instrument whose
read and write functions may fail if used in an unsuitable
environment. Please note that Panasonic accepts no
liability whatsoever for data loss or other losses either
direct or indirect arising from storage device damage or
other defects.
• When data from this unit is copied to a storage device
and is edited on another computer, the data may no lon-
ger work in this unit and storage device data may become
corrupted.
• Repair bad clips on P2 cards before copying them to a
storage device.
• SATA (serial ATA) or PATA (parallel ATA) interface storage
devices connected using a USB converter cable may not be
recognized.
18 18 19 19 20 20
HOST HOST
DEVICE DEVICE