Anti-Theft Device; Entering The Code Number - Becker DTM High Speed 7910 Operating Manual

Anti-theft Device

Entering the Code Number

Anti-theft Device
If the auto radio is disconnected from the electrical supply
source, the anti-theft device prevents it from being reconnect-
ed. After turning on the unit via the
is displayed.
Using the multifunction buttons " - ", the five-digit code
number must be entered.
Exampel: Code number 15372 (the code number can be
found on the enclosed CODE CARD).
Enter code number using the multifunction buttons.
Once the fifth digit has been entered and all other digits have
been entered correctly, the unit switches on automatically.
Note: It is important to store the CODE CARD in a safe
place outside of the vehicle. Thus, illegal use is not
possible. The sticker provided should be attached to
the inside of the vehicle windscreen/ window.
84
If an incorrect code number is entered, the prompt
be displayed once again. If an incorrect code number is en-
tered three times in a row, the unit will display
unit will be blocked for approximately 60 minutes.
button, the prompt
Three further incorrect entries will block the unit for another
60 minutes.
Attention: The waiting time will elapse only when the unit
is switched on.
will
, and the