Silvercrest DV-767 Instruction Manual page 50

Problem
The colour of the photos is
abnormal.
The photo display is not
correct.
The image is too light or too
dark.
The LCD screen is not clear. The LCD screen is dirty.
Photos, videos or voice
recordings cannot
transferred to the computer.
No sound is coming out of
the headphones.
The LCD display is not
showing any contents.
The camera will not transfer
any MP3 / WMA files.
The computer does
recognize the camera.
48
Cause
The white balance (WB) settings
are incorrect.
The photo could be damaged.
The EV bias is set incorrectly.
The cable is not
correctly.
The operating system is not
Windows
98/98SE/2000/ME/XP/Vista,
be
the computer does not have a
USB connection.
No USB driver has been installed
with Windows 98.
The headphones cable is loose.
The battery is empty.
The device is switched off.
The display is broken.
The device is in AV Out mode.
The battery is empty.
The USB cable is not connected.
The USB cable is faulty.
The memory is full.
A USB hub is interconnected.
not
The USB plug has a loose
connection.
Solution
Reset the WB (see page 21).
Run a check on your computer.
Reset the EV bias (see page
21).
Clean the screen with a clean,
dry cloth.
connected
Check the cable connection.
Install
or 98/98SE/2000/ME/XP/Vista
and a USB connection.
Install the Windows98 USB
driver from the CD (see page
39).
Connect the
correctly.
Charge the battery (see page
10.
Switch to the device on (see
page 10).
Contact the customer hotline
(see the back of the manual).
Read page 31.
Use the mains supply or USB
cable to charge the battery (see
page 10).
Connect the USB cable (see
page 35).
Contact the customer hotline
(see the back of the manual).
Delete data from your storage
medium or transfer data to your
PC (see 39).
Connect your camera directly
to the computer
necessary, remove all USB
hubs from your computer.
Reinsert the plug. If this does
not solve the loose connection,
exchange the cable.
Windows
headphones
and, if