SINGLE DIAPHRAGM CONDENSER MICROPHONE B-5 User Manual LIMITED WARRANTY Important Safety Please register your new BEHRINGER Instructions equipment right after your purchase by visiting behringer.com and read the terms and conditions of our warranty carefully. LEGAL DISCLAIMER TECHNICAL SPECIFICATIONS AND APPEARANCES...
SINGLE DIAPHRAGM CONDENSER MICROPHONE B-5 User Manual 1. Power Supply Phantom power (+48 V) is required to operate your microphone. We assume no liability for damage caused to your B-5 through deffective phantom power. Before activating phantom power, mute your playback system and connect the B-5 to the microphone input of your mixing console.
SINGLE DIAPHRAGM CONDENSER MICROPHONE B-5 User Manual 3. Low Cut-Filter and Level Attenuation (-10 dB) The B-5 features a switchable low-cut filter that eliminates low-frequency noise such as floor rumble. Set the switch to its middle position to activate the low-cut filter.
Page 5
SINGLE DIAPHRAGM CONDENSER MICROPHONE B-5 User Manual 7. Level Setting/Adjusting the Basic Sound Adjust the gain control in the microphone channel of your mixing console so that the peak LED lights up only occasionally or never at all. The EQ controls in the microphone channel should be set to mid-travel position to start with;...
Page 6
SINGLE DIAPHRAGM CONDENSER MICROPHONE B-5 User Manual 0 dB -5 dB -10 dB -15 dB -20 dB -25 dB -30 dB 250 Hz 1000 Hz 4000 Hz 16000 Hz 8000 Hz 500 Hz 2000 Hz Polar pattern (omnidirectional) 20.0 10.0 -10.0...
Need help?
Do you have a question about the B-5 and is the answer not in the manual?
Questions and answers