Specifications - Dell PowerVault MD3000i Getting Started

Getting started guide
Hide thumbs Also See for PowerVault MD3000i:
Table of Contents

Advertisement

Available languages

Available languages

Specifications

Disks
Physical disks
RAID Controller Modules
iSCSI RAID controllers
RAID Controller Back-Panel Connectors
iSCSI ports (per RAID controller)
SAS expansion port
(per RAID controller)
Debug connector
(per RAID controller)
Management port
(per RAID controller)
10
Getting Started With Your System
Up to 15 1-inch-by-3.5-inch SAS hot-plug
physical disks (3.0 Gbps). (See your
system readme file for supported disk
capacities.)
• Two hot-pluggable active/active
controllers (or one controller in simplex
mode)
• 512 MB of cache per controller
• Simplex or duplex configurations
• One temperature sensor per controller
• One 100/1000 BASE-T iSCSI Port 0 "In"
connector for connecting hosts
• One 100/1000 BASE-T iSCSI Port 1 "In"
connector for connecting additional
hosts
One 3.0 Gbps SAS Port "Out" connector
for expansion to an additional enclosure
One 6-pin mini-DIN connector
One 10/100 BASE-T connection for out-
of-band management of the enclosure

Advertisement

Table of Contents
loading

This manual is also suitable for:

Amp01

Table of Contents