How To Use The On-Screen Display (Osd) - Barco System manual E1 Installation & User Manual

How to use the on-screen display (OSD)

How to use the on-screen display (OSD)
Proceed as follows:
1. Press the Menu key (1) on the front to display the OSD main
menu (figure 47).
Note:
It may be possible that the OSD menu does not appear. If this
is the case, the front controls are locked. To unlock them,
please follow the procedure described in § "Main menu" on
page 89.
2. Press the <-> key (2) or <+> key (3) to scroll to the desired
menu item.
3. Press the Menu key (1) again to activate the selected
function or to enter the selected secondary menu.
4. If you have activated a function:
• Press the <-> key (2) or <+> key (3) to change the value.
• Press the Menu key (1) to enter the new value and return
to the menu.
System manual E1
BARCO
Figure 46
87