APRILIA RS 125 Workshop Manual page 37

TECHNICAL INFORMATION
RS125
Description of functions
Press the MODE button repeatedly and zone C of the
display will cycle through the following functions:
- ODOMETER
- TRIP METER
- CLOCK
- BATTERY VOLTAGE
- LAP TIMER
ODOMETER (ODO)
The display shows the total distance covered by the vehicle.
The odometer cannot be reset.
TRIP METER (TRIP)
When the ODO readout is displayed, press the MODE
button briefly to switch to the trip meter.
Hold down the MODE button when the TRIP readout is
displayed to reset the trip meter.
Clock
When the TRIP readout is displayed, press the MODE
button briefly to switch to the clock.
Clock setting
With the motorcycle stopped and the clock displayed, hold
down the MODE button until entering the clock setup mode.
The display shows the two hour digits; hours increase by 1
at each press of the MODE button; hours run from 1 to 12
and then back to 1.
Press and hold the MODE button to confirm the hours
setting and switch to minutes setting; the display shows the
minute digits; minutes increase by 1 at each press of the
MODE button; minutes run from 0 to 59 and then back to 0
at the next press of the MODE button.
When finished, the clock remains frozen for three seconds
and the display shows set time.
2 - 17