Related Manuals for Danfoss TS715Si
Summary of Contents for Danfoss TS715Si
-
Page 1: User Guide
MAKING MODERN LIVING POSSIBLE TS715Si Electronic Single Channel Timeswitch with Service Interval Timer User Guide Danfoss Heating... - Page 2 TS715Si Electronic Single Channel Timeswitch with Service Interval Timer For a large print version of these instructions please call Marketing on 0845 121 7400. Certification Mark Danfoss can accept no responsibility for possible errors in catalogues, brochures, and other printed material. All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S.
- Page 3 Thank you for buying a Danfoss product Danfoss Heating...
-
Page 4: Table Of Contents
Index 1.0 User Instructions Your Timeswitch ................6 Preset Programmes ...............6 Before you start ................7 Choice of 24hr or AM/PM display..........7 Setting the Date and Time ............7 Accepting the Preset Programmes ..........8 Before you Change the Preset Programmes ......9 1.7.1 Programming the On/Off Times in 5/2 Day Mode ..10 1.7.2 Programming the On/Off... -
Page 5: What Is A Programmer
The text below has been edited and approved by the Plain English Campaign, who has issued a Crystal Mark to be displayed with it. What is a Programmer? ... an explanation for householders. Programmers allow you to set ‘On’ and ‘Off ’ time periods. Some models switch the central heating and domestic hot water on and off... -
Page 6: User Instructions
1.0 User Instructions 1.1 Your Timeswitch The TS715 Si allows you to switch your system on and off at times that suit you. You can programme up to 3 separate ON/OFF times per day. 1.2 Preset Programme Your TS715 Si comes ready programmed with a set of operating times which often suit most people. -
Page 7: Before You Start
1.3 Before you start Open the fl ap on the front of the clock. Press the RESET button using a non-metallic object (e.g. pencil/matchstick) until you hear a click and the red light on the front of the unit comes on and the LCD goes blank. -
Page 8: Accepting The Preset Programmes
Press DAY/HOL to display day and month. Use the + or - buttons to set the correct month (Jan = 1, Feb = 2 etc.). Press DAY/HOL to display day and month. Use the + or - buttons to set day of month. -
Page 9: Before You Change The Preset Programmes
1.7 Before you change the preset programmes Your installer will have set your unit to operate in one of the following modes: • 5/2 day - one set of programmes for weekdays and another for weekends (page 10-11) • 7 day - diff erent settings for each day of the week. (page 11-12) •... -
Page 10: Programming The On/Off Times In 5/2 Day Mode
1.7.1 Programming the On/Off times in 5/2 day mode Press PROG once until SET ON TIME DAY/HOL appears at the top of the display and MOTUWETHFR appears at the bottom of the display. Use the + or - buttons to set the time you would like your system to fi... -
Page 11: Programming The On/Off Times In 7 Day Mode
To set the times required for SA DAY/HOL and SU repeat steps 1-3 or if the same settings are required press COPY. Press the PROG button once to DAY/HOL return the unit to RUN mode (time appears and colon in the display begins to fl... - Page 12 Continue programming DAY/HOL system ON and OFF times in this way by using the + or - buttons to set the time you want and pressing NEXT ON/OFF button to move to the next setting. Press DAY/HOL button once only. DAY/HOL The next day will appear at the bottom of the display.
-
Page 13: Programming The On/Off Times In 24 Hour Mode
1.7.3 Programming the On/Off times in 24 hour mode Press PROG once until SET ON DAY/HOL TIME appears at the top of the display. Use the + or - buttons to set the time you want your system to fi rst come on in the morning (Event 1). -
Page 14: Running Your Programme
1.8 Running Your Programme To run the programme: press the SELECT button. Each time you press the SELECT button the display will change between ON, ALLDAY OFF, ALLDAY and AUTO. • AUTO = the system will come on and go off at the programmed times. -
Page 15: Advanced Settings
2.0 Advanced Settings 2.1 Temporary Override Buttons Sometimes you may need to change the way you use your heating temporarily, i.e. due to unusually cold weather. The TS715 Si has two convenient overrides which can be selected without aff ecting the set programme. -
Page 16: Holiday Programme
2.2 Holiday Programme To automatically bring the heating back on when returning from holiday the TS715-Si has a built in holiday feature. Follow the steps below to set the date that the system needs to come back on. DAY/HOL Press DAY/HOL DAY/HOL Use the + or - buttons to select the year. -
Page 17: Changing Clocks Forward And Backward
2.3 Changing Clocks Forward and Backward This is handled automatically. Should the installer have turned off Automatic Time Change then follow the instructions below. Open the fl ap on the front of the unit to reveal the programming buttons. To change from Summer to Winter (clocks back) - •... -
Page 18: Service Interval Timer
2.4 Service Interval Timer • If the property is owned by a landlord he may, for gas safety reasons, have instructed the installer to set the service interval timer. • If set, 28 days prior to the boiler service due date, a momentary visual and audible warning will remind you to have the boiler serviced in the next 28 days. -
Page 19: Making A Full Reset
2.5 Making a Full Reset If it is necessary to fully reset the unit, excluding the date and time, follow the instructions below. Press and hold the +1HR and MAN buttons on the left hand side of the product. +1HR +1HR Press the RESET button and hold for 3 seconds. -
Page 20: Fault Check List
2.6 Fault Check List o Hot Water o Heating TS715SI... - Page 21 Danfoss Heating...
- Page 22 TS715SI...
- Page 23 Danfoss Heating...
- Page 24 Danfoss Ltd. Ampthill Road Bedford MK42 9ER Tel: 0845 1217 400 Fax: 0845 1217 515 Email: ukheating@danfoss.com Website: www.heating.danfoss.co.uk Part No.38160v02s7-06 02/11...
Need help?
Do you have a question about the TS715Si and is the answer not in the manual?
Questions and answers