Trip Odometer Button; High Beam Light; Shift Lever Indicator; Trip Odometer Button — Base Cluster - Chrysler 300 Owner's Manual

WARNING!
A hot engine cooling system is dangerous. You or
others could be badly burned by steam or boiling
coolant. You may want to call a service center if your
vehicle overheats. If you decide to look under the
hood yourself, refer to Section 7 and follow the
warnings under the Cooling System Pressure Cap
paragraph.

15. Trip Odometer Button

Trip Odometer Button — Base Cluster
The word TRIP will appear when this button is pressed.
Push in and hold the button for two seconds when the
trip odometer displays to reset it to 0 miles (km). A
second press of the button will display the outside
temperature in the odometer.
UNDERSTANDING YOUR INSTRUMENT PANEL 215
Trip Odometer Button — Premium Cluster
Press this button to change the display from odometer to
either of two trip odometer settings. The letter "A" or "B"
will appear when in the trip odometer mode. Push in and
hold the button for two seconds to reset the trip odometer
to 0 miles (km). The odometer must be in TRIP mode to
reset it.

16. High Beam Light

This light will turn on when the high beam
headlights are ON. Push the multifunction lever
away from the steering wheel to switch the headlights to
high beam.

17. Shift Lever Indicator

This indicator shows the automatic transmission shift
lever selection.
4