Switching The Power; Adjusting Display Settings; External Controls - Acer LCD monitor Quick Start Manual

Switching the Power

First, switch the power on to the monitor, then switch the power on to the computer. When you
see the LED on the power button go green, this indicates the computer is ready for use. Allow
about 10 seconds for the video signal to appear. If you do not see the green light on the power
button or a video signal, check the connections.

External Controls

1 AUTO
<
2 MINUS
>
3 PLUS
OSD
4
Function
5
POWER

Adjusting display settings

If OSD is active, press to exit a selection in OSD. If OSD is
inactive, press and the monitor will automatically optimize the
position, focus and clock of your display.
If OSD is active, press to select or adjust OSD options.
If OSD is active, press to select or adjust OSD options.
Press to view OSD.
Press again to enter a selection in OSD.
Power on/off
Green: power on
Orange: in sleep mode
6