Binatone Terrain 200 User Manual

Antenna LCD screen
- press and hold to transmit
Call button
- press to send ringing
Menu button
- press to change
Channel Number from 1 to 8 as selected by the user.
Displayed when battery level is low.
Displayed when in Scan mode.
Displays the current speaker volume setting.
Displayed when transmitting a signal.
Displayed when receiving a signal.
2.1 Removing the Belt clip
Pull the belt clip latch away from the PMR. While
pulling up the belt clip latch, push up the belt clip
as shown in fig.1.
2.2 Installing the Belt clip
Slide the belt clip into the slot as shown in fig.2.
A "click"indicates the belt clip is properly locked into
its position.
2.3 Installing the batteries
With the belt clip removed, slide the battery cover
making sure they are fitted according to the
Figure 1