Monitor Interface Command - Cisco CRS-1 - Carrier Routing System Router Troubleshooting Manual

Chapter 1 General Troubleshooting
•
•

monitor interface Command

Use the monitor interface command to monitor interface counters. The following example shows the
output of the monitor interface command.
The Cisco IOS XR Manageability Package is required to use the monitor interface command.
Note
The following example shows the output of the monitor interface command with a specified interface.
RP/0/RP0/CPU0:router# monitor interface tenGigE 0/3/0/7
CRS-A_IOX
TenGigE0/3/0/7 is up, line protocol is up
Encapsulation ARPA
Traffic Stats:(2 second rates)
Errors Stats:
Quit='q', Freeze='f', Thaw='t', Clear='c', Interface='i',
Next='n', Prev='p'
Brief='b', Detail='d', Protocol(IPv4/IPv6)='r'
The following example shows the output of the monitor interface command.
RP/0/RP0/CPU0:router# monitor interface
CRS-A_IOX
Interface
MgmtEth0/RP0/CPU0/0
Bundle-POS100
Bundle-POS101
MgmtEth0/RP1/CPU0/0
FINT0/RP1/CPU0
TenGigE0/3/0/0
TenGigE0/3/0/1
TenGigE0/3/0/2
TenGigE0/3/0/3
OL-21483-02
monitor processes Command, page 1-69
monitor threads Command, page 1-70
Monitor Time: 00:00:08
Input Packets:
Input pps:
Input Bytes:
Input Kbps (rate):
Output Packets:
Output pps:
Output Bytes:
Output Kbps (rate):
Input Total:
Input CRC:
Input Frame:
Input Overrun:
Output Total:
Output Underrun:
Monitor Time: 00:00:08
In(bps)
45014/
0/ --%
0/ --%
0/
0/
0/
443/
0/
0/
1466462
1
379782697
6
2403444
0
269350468
0
2
0
0
0
0
0
Out(bps) InBytes/Delta
0% 52156/ 0% 3.9G/14686
0/ --%
0/ --%
0% 0/ 0% 27.8M/0
0% 0/ 0% 121.8M/0
0% 0/ 0%
0% 683/ 0% 532.1M/144
0% 0/ 0%
0% 0/ 0%
Cisco IOS XR Troubleshooting Guide for the Cisco CRS-1 Router
SysUptime: 118:58:20
Delta
4
1730
( 0%)
2
140
( 0%)
0
0
0
0
0
0
SysUptime: 118:58:50
OutBytes/Delta
842.2M/17016
0/0 0/0
0/0 0/0
1.8M/0
3.5M/0
0/0 0/0
744.4M/222
0/0 0/0
0/0 0/0
Monitoring
1-67