Winscript Live "Live Mode; Sequence Status; Event Status; Highlighted Events - Alcorn Mcbride Pro Series User Manual

WinScript Live "Live Mode"

When operating in "Live Mode", all modifications to the script take immediate effect within the show
controller. In addition, resources such as "Watches", "Live Log" and "Live Display" will provide additional
debugging and status information.
Connect to live mode using the button located on the toolbar. Scripts must be saved
and checked for errors before they can be downloaded.
After the connect button is clicked, the script's timestamp will be compared to the timestamp of the active
file in the show controller. If the timestamps match, live mode will connect immediately. If not, you will be
prompted to download your active script or upload the active script from the show controller.

Sequence Status

The status column in the sequence view will display the current status of the sequence when connected in
live mode. The buttons will "light up" to indicate the status.

Event Status

Highlighted Events

After connecting to "Live Mode," events will appear in yellow after they have recently executed. If events
are within a few frames of each other, you may not see certain events become highlighted due to screen
refresh times.

Current Time

The current running time of the sequence can be viewed in the upper right corner of the "Events" window
for that sequence.
WinScript Live "Live Mode" Page 55