Initialization Of Lg Network Storage - LG N1T1DD1 Owner's Manual

18. Initialization of LG Network Storage

If you initialize Network Storage you used, data is deleted completely. Therefore
please back up the saved data to a different storage device prior to the initializa-
tion.
※ For N1A1 model, use a separate EX. ODD to initialize.
※ Initialization CD is not provided. Please download LG Network Storage Installer (initializa-
tion CD) image from the Network Storage product site (http://www.lg.com), then burn the
image file (iso) you have download on the disc using a PC tool.
For the installation time for hard
disk initialization, please refer to the
table on the right side.
※
It is based on Hitachi HDD, 7200 RPM,
and the pertinent time may vary depen-
dent on the manufacturer of the hard disk.
※ N1A1 model does not support ODD function.
Have the power turned off, and push
A
in 'LG Network Storage PC Software
Installer' (initialization CD) as in the picture
with the direction of an arrow as a data
writing side.
※ When the power is turned off, CD does not
go in completely, therefore do not try hard
to push it completely in.
Press POWER button at the back of Net-
B
work Storage while pressing 'BACK-UP'
button.(mode switch is 'NAS')
CD goes in automatically while LED
blinks. (ODD indicator flickers only on
N1T1 model)
※
You may remove your hand from the Back-
up button and Power button when the
LED starts blinking.
Since the CD has gone inside, initializa-
tion starts automatically.
※ During the process of initialization, 3 LED
keep blinking, and when the initialization is
completed, it is rebooted automatically.
A total ca-
pacity of HDD
1TB HDD
2TB HDD
109
Installation time for
initialization
Approximately 45
minutes
Approximately 80
minutes