Scsi Backplane - Asus AP3000 Hardware Reference Manual

• 4-11. SCSI Backplane
The SCSI backplane of this server is comprised of one SCSI board (DA-
BP5) with Ultra2 SCSI connectors, power inputs, and SCSI ID dip switches.
This configuration allows Ultra2 SCSI SCA hard disk drives to be docked
into the server. The SCSI board (DA-BP5) does not have auto termination,
therefore the included terminator block must be used on the end connector.

SCSI Backplane

Front Side
PWR3
Connector
PWR2
Connector
PWR1
Connector
SMB Out
SCSI Backplane
Back Side
1.6" Tray
Connector #5B
1.6" Tray
Connector #3B
1.6" Tray
Connector #1
32
IV. Hardware Setup
SCSI ID Select DIP Switches
Fan Connector
SMB In
AP 3000 Hardware Reference Guide
Connects to a SCSI
controller through
the Ultra2 cable
The provided ter-
minator must be
placed on this bot-
tom SCSI connec-
tor.
1" Tray
Connector #5
1" Tray
Connector #4
Fan Control Board
Connector
1" Tray
Connector #3
1" Tray
Connector #2
1" Tray
Connector #1