Hotel Mode - Akura APL2YR1968UH Instruction Manual

Hotel Mode is for users that require limited access to services and levels, such as "Volume" where the full volume
level can cause a problem.
The "default "setting is "Off". To activate Hotel mode, press the Main
Menu button and select "Lock" menu. "Fig 33". To enter the Lock
menu you must press the ▼button and enter the "Pin number" "0000"
default. Use the ▲/▼buttons to select "Hotel Setting" and press the
OK button . Fig 34 will now be displayed. Use the ▲/▼buttons to
select "Hotel Lock, and use the ►/◄ buttons to select "On or Off". If
set to "Off" all the items below are "greyed out".
Lock Channel. If set to "On" will lock the TV to the Channel displayed
in the Channel number box, this cannot be changed. Note :-The
channel number can be changed in the normal menu.
Set Source. Use the ►/◄ buttons to select the signal source.
Normally set to "Off" you can select, DTV, Radio, Data, ATV, Media.
Channel Number. For information only.
Picture Lock. Normally set to "Off". When set to "On" locks the
Picture level settings, e.g Brightness.
Key Lock. Normally set to "Off". When set to "On" locks the User
Buttons on the TV.
Max Volume. Normally set to 100. To reduce the Maximum volume
level use the ►/◄ buttons to set the required level.
Source Lock. Select and press the OK button. Fig 35 will be
displayed. In "default" mode all sources are selected as "Off". To stop
the use of any input source, use the ▲/▼buttons to select and the
►/◄ buttons to set "On".
Clear Lock. To reset all Hotel Mode settings to "Default" select and
press "OK".

13. Hotel Mode

20
20
Fig 33
Fig 34
Fig 35