Page 2
UPPLY LITE POWER MEETS UNRIVALED PERFORMANCE Antec’s HCG M power supplies are the perfect combination of power and efficiency. The HCG M features special heavy-duty High Current connectors and cabling that supply extreme levels of power, and superb efficiency thanks to 80 PLUS®...
Page 3
80 PLUS® C ERTIFICATION 80 PLUS® certification is the most widely recognized independent standard in power supply efficiency. An 80 PLUS® certified power supply uses less energy and generates less heat to stay cooler, run quieter and last longer. The HCG-520M has been 80 PLUS® Bronze certified to be at least 82% efficient at a wide range of operating loads;...
Page 4
ABLE Cable Quantity Power Connectors Description 24 (20+4)-pin main connector Fixed cables 1x 8 (4+4)-pin ATX12V/EPS12V 8 (6+2)-pin PCI-E Molex + FDD SATA + Molex SATA...
Page 5
NSTALLATION 1. Install the PSU into either the top or bottom of your case with the four screws provided. Refer to your case manual if you are unsure where the power supply should be installed. 2. Connect the 24-pin main power connector to your motherboard. If your motherboard uses a 20-pin connector, detach the 4-pin attachment on the 24-pin connector.
Page 6
4. Connect extra cables from the cable pack to the sockets on the power supply only if needed. If you are going to plug the PCI-E cables into the PSU, they should go into the red sockets. If the red sockets are not being used for PCI-E, then they can be used for any other type of cable supplied in the pack that accompanies the PSU.
Page 7
7. Hard drives, optical drives (CD/DVD/BluRay™) and other accessories will use either the older 4-pin Molex connector or the newer 15-pin SATA connector. 4-pin Molex connectors have two black, one yellow and one red wire. The SATA connector has an additional orange power wire. 8.
Need help?
Do you have a question about the HCG-520M and is the answer not in the manual?
Questions and answers