JVC DR MV79B - DVDr/ VCR Combo Instructions Manual page 245

If you have any questions regarding the hookup or operation of your DR-MV150B, please contact our
Customer Care Center at 1-800-252-5722
Please Note: Be sure to connect the AC power plug into the power outlet after all other connections are
completed
During the Initial Set Up, I am being asked to set
the Clock. Does this model have Auto Clock Set?
T
his unit doesn't have an Auto Clock Setting. You will
need to manually set the clock as shown on page15 of
the owner's manual under the Initial Setup Wizard. You
can also look on page 17 of the owner's manual and
follow the directions for Clock-Set.
When I turn on my DR-MV150B, it flashes "Hello"
and buttons on the remote control or the front
panel are not responding for 10 - 15 seconds. Is
this normal?
When the DR-MV150B is first turned on, it will flash"
Hello" for a few seconds. Please wait until "Hello" stops
flashing before using. After a disc is inserted into the
tray, it takes 25-30 seconds until the set can be
operated.
Why can't I see Menu, DVD playback, VHS playback,
or the Recording channel on my TV?
The recorder must be connected to the television using
AV cables or HDMI cable, and the television's input
mus be selected correctly to see the video. Refer to the
TV's instruction book.
My TV has RF connector only. How can I view the
Recorder Menu, DVD playback, VCR playback or
Channel scan?
For viewing the Recorder video on TV that has only RF
connector, you have to use an RF converter. Refer to
the Quick Start Guide.
How can I watch one program while recording
another program
Connect the recorder's "Antenna IN" to the wall con-
nector. Connect the recorder to the TV using RF cable
and AV cable. Perform channel scan on both TV and
the recorder. Select the viewing channel on the TV and
the recording channel on the recorder. Use the TV's
input select to flip between the two.
I am using cable box. Why am I unable to watch one
program while recording another one
Your cable box or Satellite box outputs the selected
channel through all outputs (RF, AV, or HDMI). In order
to watch one channel while recording another, you
need to connect cable signal (not from the cable box)
or antenna signal direct to the TV using RF con
How do I set timer recording?
Refer to page 35 of the instruction book
DR-MV150B Quick Guide FAQ
Thank you for your purchase of the JVC DR-MV150B DVD Video Recorder.
nection
Why is my remote not working after I change
batteries?
After replacing the batteries, the remote code is reset
to 'C'. Refer to page 8 of the instruction book and set it.
Can I control my TV or Satellite box using this
remote?
The remote control supplied with DR-M150 is not a
multi-brand-remote.
Why the newly recorded DVD plays in the DR-
MV150B but does not play in other DVD players?
You must "Finalize" the DVD before it can play in
another DVD player. Please see page 22 in the
Instruction book.
What DVDs can I use to record on my DR-
MV150B?
DVD-R, DVD+R, DVD-RW and DVD+RW, DVD-RAM
can be used to record on your DR-MV150B. For recom-
mended recordable DVD discs, please refer to page 3 in
your owner's manual.
Why do I get a message "Copy Prohibited" when
trying to record
The signal you are attempting to record is copy prohibit-
ed. This recorder can record copy permitted video on
normal recordable disc and 'copy once' video on CPRM
disc. Contact the retailer or JVC parts department for
CPRM disc.
Why my DR-MV150B is showing a distorted
picture?
The DR-MV150B has a progressive scan feature. This
feature only works with a TV that accepts progressive
scan signal. If the picture is distorted, press OUTPUT-
STATUS button on the front panel repeatedly to select
480i. Refer to page 6 of the Instruction book.
Why is the VCR playback picture distorted when
the output status is set to 1080p?
When viewing VCR playback, the picture can be dis-
torted when output status is selected to 1080p. If the
picture is distorted, press OUTPUT STATUS on the
front panel repeatedly until the picture appears normal.
Refer to page 6 of the Instruction book.
Why is my DR-MV150B not showing 1080p picture
via component output?
When HDMI is connected and 720p/1080i/1080p is
selected there will be no signal output via the COMPO-
NENT OUT. Press OUTPUTSTATUS button and select
480i or 480p in order to watch the video signal from
COMPONENTOUT.
LVT2018-001B
0309SKMLGEEGL