Adjusting The Grip Belt; Attaching The Shoulder Strap - Panasonic AG-HMC80PJ Operating Instructions Manual

Adjusting the grip belt

Adjust the grip belt to suit your hand, and hold it
correctly.
1
Open the belt cover and loosen the belt.
2
Work your hand through the grip belt and
fasten the belt.
• Slip your hand through the belt as far as
it goes.
• Tighten up the belt so that your hand
remains firmly in place.

Attaching the shoulder strap

Attach the shoulder strap and use it as a precaution against dropping the camera.
1
Thread the belt through the shoulder belt
installation hole.
Shoulder belt
installation hole.
• Thread the belt through the fastener
after threading through the shoulder belt
installation hole. At least  cm of the belt
must extend from the fastener.
• When loosening the belt, please take care so
that the belt does not come away from the grip
belt stopper.
Grip belt stopper
2
Install the belt on the other shoulder belt
installation hole.
7